Ardy

Thanks Stu for the insight.

Brett, that's a good point. Makes much more sense. Thanks all Ardalan

OK. So I would be guessing that the other number next to the G, "46" given in the examples, would be the height of the runway? Thanks Ardalan

Thank you, for the information. The chart is from KMCO in the US and it's an ILS approach chart Ardalan

Hi there, I have been using Navigraph Charts for a while now and I had always wondered what 4 little numbers on every chart mean. I think they are altitudes but they are all different. The first one says "AD ELEV "Number" It is on the bottom left on an ILS approach runway chart and it's next to a compass ex: AD ELEV 96 Example The second one is a number on a little runway next to the runway length and next to a letter G which I believe stands for the glideslope ex: 46 G 2743 Example The Third one is on the same little runway diagram and i

OK. I understand now. Thank you Peter for your help Ardy

By, one thousand, I mean why is half of Europe covered by this airspace. Generally, there is only, for example, one Oakland Centre, but as you can see on this map, there are more than one EURMs. Ardy

Oh, thank you, Peter. But then why are there like a thousand of the same control centre. Ardy

Hello, I'm not sure if any of you use this program called VATSPY but it basically shows VATSIM traffic and shows who's online. Today, I noticed that some of the control centers were lightly colored in instead of darkly colored in and there was more than one of that center. I have included a link here to a screenshot I got just in case I didn't explain it with enough detail. It might take a while for the picture to load and become clear, but trust me, the text is readable. To anyone reading this post later, the link to the picture has been removed as the problem has been solve

OK Thanks. I'm thinking about getting Steve's DX10 fixer. I've done a firmware update on my SSD and the problems seem to be gone.

OK Thanks Bruce. I understand it much better know. I also think that CC has a good point. It makes sense. Thank you everyone for helping me understand that route. Ardy

Oh OK Thanks. Do you know how would I enter VUZ333025 into the FMC?

Hello, I was just on FlightAware and I found a flight from KBHM to KMEM. SWA 1863 This is the posted route NW9 VUZ333025 HAB LUGOH2 What does this route even mean? NW9 isn't a SID, Waypoint, NDB, VOR, or Jetway I also don't understand what this means "VUZ333025" Again, It's not Waypoint, NDB, VOR, or Jetway. I'm just a bit confused on what the route basically means. Thanks. Ardy.

Ok Thanks. I think I will just leave it there as I am already running 30 FPS all the time except when in a highly detailed airport or bad weather in the PMDG 738

Ok Thanks UKJim. I'll think about it.

Hi there, I hope you're all well. I have a quick question. Currently, I have FSX installed in Program Files x86. Is it true that on Windows 10, you get better performance if I install it in C:>FSX? And would I get even better performance if I install it on a separate SSD? Would This also be true if I had UAC set off completely? Thanks Ardy

Ok thanks Tim. So I can post videos on youtube and make a little bit of money from the ads. Right? Ardy

Ok everyone. Thanks alot for your useful info. Thank you "needles". I will contact ORBX about my plans with the channel. Ardy

Ok thanks a lot. You cleared up a lot of confusion. But just to let you know. Would it still be ok if I made a small amount of money from the ads on YouTube?

Hi there guys, I was thinking about starting a YouTube channel. I noticed that on ORBX's website they have a commercial use section. If I want to post videos with FTX Global installed would I need to buy the Commercial License? Thanks If so or If not. Why?

Ok, thanks, I posted it on computerforum.com Ardy

Hello, I am currently running a i7 4790K at 4.6 GHz. I have a corsair H75 water cooler. I was thinking about getting a Pentium G3250 to get better performance. Is my theory correct? My plan is that since FSX only uses 1 main core and the other one for smaller tasks. It doesn't really need a lot of cores. Since the Pentium has 2. It would create less heat. Then I would overclock it to 7.5 GHz. Could you please tell me if this is a good idea and what sort of voltages I would need. Or should I set the voltage to auto. Also would it be possible to do this with the Pentium G3250 both

Okay Thanks Very Much for your Help. I think I'll just stick to FSX. Ardy

Hello Everyone, Could you please explain: FSX performance VS X-Plane performance, FSX performance VS P3DV3 Performance, FSX VS FSX:SE Performance. And also, what's the difference between X-Plane and the Steam Edition. Thank you very very much Ardy

Hi Bruce, Thanks for your reply. I'm talking about the PMDG NGX and sorry about the wrong definition. I just couldn't think of the name so I put the closest thing in. The speed is the same on both the ND and the FMC PROG page but the heading is off by 2 degrees. So now I understand that one of the wind speeds is in True North and the other is in Magnetic. Thanks for your other answers as well. Ardy