AIRDOG 1 Posted April 16, 2014 Report Share Posted April 16, 2014 OOOPS... I guess I should have posted this here This appears to be incorrect... the radials do not intersect. "Navigate to Waypoint 2 - intersection of 167 deg OB radial from TIR VOR and 160 deg bearing to LAY NDB" Link to post Share on other sites
brett 2,283 Posted April 16, 2014 Report Share Posted April 16, 2014 Are you using the Show Radial option in PlanG Rick? If so, make sure you zoom into the LAY NDB close enough to separate the NDB from the DME/VOR. You might be showing the OB 340* course from the ISY DME instead of the 340* from the LAY NDB, they are almost right on top of one another. I made the same mistake myself the first time when I was checking this out for you. Done correctly you will end up west (around 288* and 13nm) from EGEY. Link to post Share on other sites
AIRDOG 1 Posted April 16, 2014 Author Report Share Posted April 16, 2014 OK... That's definitely an OOOPS. yes... Plan G. I usually get rid of the superimposed VOR or NDB if they overlap, but that I missed that one underneath this time. THANKS Brett !! Link to post Share on other sites
brett 2,283 Posted April 16, 2014 Report Share Posted April 16, 2014 My pleasure, enjoy the rally. Link to post Share on other sites
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now