Jump to content

MEBAR 2014 Leg 3: Stornoway to Glenforsa


Recommended Posts

Welcome aboard for Leg 3 of MEBAR 2014. Today, we're flying from Stornoway on Lewis, south to Glenforsa on the Isle of Mull. “Simples”, I hear you say – well, not quite. Here's Tim's interpretation of Andrew's flight briefing:

Leg03_PlanG_zpse6456260.jpg

The ministry said sunny, but they got ot wrong – it's p*ss*ng down as we take off:

MEBAR03_01_Take_Off_Stornoway_zps93d2d27

The plan takes us westward, out to sea to Eilean Mor, where we turn back...

MEBAR03_02_Turn_At_Eilean_Mor_zpsb1347b7

… over south Lewis (or the Isle of Harris, as some maps say):

MEBAR03_03_Lewis_zpsdcb51886.jpg

This is Scalpay and we turn south west:

MEBAR03_04_Scalpay_zpsf39325a4.jpg

Passing Weaver's Point:

MEBAR03_05_Weavers_Point_zps04288706.jpg

And head out to sea again to visit the Monarch Islands:

MEBAR03_06_Monach_Islands_zps6c4a8933.jp

Back to Benbecula (EGPL), where we'll try for our first Touch and Go:

MEBAR03_08_Benbecula_EGPL_zps14dc6e63.jp

Bit left of the centre line, thanks to the cross wind (Ha! - Ed), and a quick bounce...

MEBAR03_09_Benbecula_TandG_zps99bcfb4f.j

Turning south again at Ushenish:

MEBAR03_10_Ushenish_zps6788e455.jpg

Over Barra – yes, that is Barra as far as FSX is concerned, anyway! Must be low tide...

MEBAR03_11_Barra_zps0cc0bc25.jpg

Turning south east at Barra Head:

MEBAR03_12_Barra_Head_Turn_zps3c7d9b5b.j

And turning north east over Skerryvore:

MEBAR03_13_Turn_At_Skerryvore_zpsb53d815

Here's Tyree (EGPU), our second Touch and Go candidate:

MEBAR03_14_Tyree_EGPU_zps0ed9acbf.jpg

Base Leg at EGPU:

MEBAR03_15_Tyree_Base_zps318c2809.jpg

Making another splash – magic!

MEBAR03_16_Tyree_TandG_zpsbe710b19.jpg

Changing course at Hyskeir:

MEBAR03_17_Turn_At_Hyskeir_zpsaf32c2c9.j

And turnin west, again, at Loch Harport, famous for its farmed salmon:

MEBAR03_18_Turn_At_Loch_Harport_zpsb6ad6

Turning north east at Neist Point, the westernmost part of Skye:

MEBAR03_19_Turn_At_Neist_Point_zpsc759ce

Passing Waternish Point:

MEBAR03_20_Turn_At_Waternish_Point_zpse0

And we make landfall at Rhua Rheid, on the Scottish mainland, to turn south:

MEBAR03_22_Turn_At_Rua_Rheid_zps7671efed

This is South Rona:

MEBAR03_23_Turn_At_South_Rona_zps78e034a

And this is Ornsay:

MEBAR03_24_Turn_At_Ornsay_zpsa7247a44.jp

Nearly there now (!) - passing Ardnamurcha:

MEBAR03_25_Turn_At_Ardnamurchan_zps464f2

And this is Tobermory:

MEBAR03_26_Tobermory_zpse0ba0a59.jpg

Our destination – Glenforsa (ULL):

MEBAR03_27_Glenforsa_zps166b964f.jpg

Long Final for ULL:

MEBAR03_28_Long_Final_ULL_zps7bb23680.jp

And we're down:

MEBAR03_29_Landing_ULL_zps798857be.jpg

Only 10 minutes early, this Leg – an improvement! And a battle against the elements is over – until, possibly, Leg 4. Hope you enjoyed the rather bumpy ride – and Thanks for joining us!

Cheers – Dai. :cool:

Link to post
Share on other sites

Nice work Dai, enjoyed watching you fly. :thum:  

 

I had a bit of trouble with this flight. Made the rookie mistake of turning in a test flight at max cruise, which put be in a position to fly outside of the green due to the headwinds for most of the flight. Glad I wasn't flying an A2A plane, I would have needed an overhaul. :D

Link to post
Share on other sites

Thanks for your kind comments - appreciated. :thum:

Flight planning is a lot easier now I know what I'm looking for. The flights themselves are nearly all VFR as the VOR/NDB intersections are not straightforward nav directions. Did this leg 'blind', as usual, and was pleased to be within 5 % of the time when I'd finished.

The GPU is working - just, so I may be able to fly Legs 4 and 5, with any luck...

Cheers - Dai. :cool:

Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Recently Browsing   0 members

    No registered users viewing this page.

×
×
  • Create New...