J G 927 Posted July 29, 2015 Report Share Posted July 29, 2015 I have recently bought the AFS-Design F4 Phantom. I loaded it up and this is what I get:- From the outside I get this.... The textures are all shiny in the rotating aircraft selection screen (Free flight) AFS-Design seem to have no support so has anyone had this problem? Has anyone solved this problem? Any help would be good. JG Link to post Share on other sites
wain 879 Posted July 29, 2015 Report Share Posted July 29, 2015 could it be you have DX10 preview checked? I had this with a Carenado Caravan, only thing I could do was uninstall followed by reinstal..seemed to sort it...... Link to post Share on other sites
Captain Coffee 2,030 Posted July 29, 2015 Report Share Posted July 29, 2015 I used to get this all the time before I switched to DX10 fixer. Do you use the DX10 Steve's Fixer? If so, did you refresh the DX10 texture library (or whatever it is called) after installing the plane? Link to post Share on other sites
J G 927 Posted July 29, 2015 Author Report Share Posted July 29, 2015 I do use the DX10 fixer. Not sure how to run the refresh though. Link to post Share on other sites
wain 879 Posted July 30, 2015 Report Share Posted July 30, 2015 When you launch the fixer it should tell you that things have changed and ask you to refresh..have to reinstall mine again but sure thats how it works... Wayne Link to post Share on other sites
J G 927 Posted September 7, 2015 Author Report Share Posted September 7, 2015 I have solved this issue. I was using Steve DX10 fixer. It seems that this Phantom really doesn't like DX10. Run it in old fashioned DX9 and it is just fine! Link to post Share on other sites
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now