hlminx 301 Posted October 1, 2017 Report Share Posted October 1, 2017 Looks like 520 people on an Air France A380 are breathing a sigh of relief after the Number 4 engine fan 'separated'. The flight diverted to Canada and landed safely, but the photos of the damage show how lucky they all were, and what a sturdy aircraft the A380 is. https://avherald.com/h?article=4af15205 Link to post Share on other sites
mutley 4,498 Posted October 1, 2017 Report Share Posted October 1, 2017 Seems like the crew handled it well, except the 9 hours passengers were left waiting, military base apparently. Link to post Share on other sites
phil white 274 Posted October 1, 2017 Report Share Posted October 1, 2017 I saw images of this on Facebook yesterday. Link to post Share on other sites
allardjd 1,853 Posted October 2, 2017 Report Share Posted October 2, 2017 I can't claim to have yet had a chance to do any kind of detailed look into this, but what I've seen so far seems to suggest a shaft failure that separated the fan from the rest of the engine. That could have been the result of a fan failure of some kind causing a massive imbalance leading to a very rapid shaft fracture, or alternatively might have been a simple failure of the shaft where the fan in its entirety simply came off. There are at least a couple of significant differences between this event and the Qantas A380 accident in Singapore. Most notably, it's a GE/P&W engine, not R-R. Secondly, the location of the failure is far forward in the engine, not in the hot section as it was in the Qantas/Singapore event. This is critical because there was much less "collateral damage" in this case. The Qantas engine shrapnel, originating much further aft in the engine and including massive turbine wheel chunks, did significant damage to systems, structures and components in the wing. The resulting failures cascaded throughout the aircraft systems and resulted in, among many other things, an aft-moving CG (from fuel loss and the crippling of the fuel transfer system) that prompted them to land as quickly as possible even though they were still well above the max landing weight for an A380. The failure site, being far aft in the engine, was in line with much that was critical and as a result, caused massive damage to things other than the affected engine. The Qantas event damaged the wing spar, fuel tanks and lines, control wiring for the adjacent outboard engine and other very important systems that affected the entire airplane. In the AF case it appears that the effects were mainly confined to the failed engine itself, making this essentially a single engine failure in cruise to a 4-engine aircraft. There isn't much in the forward cowl and housing that is critical to anything except that one particular engine - sensors, cowl de-icing ducts and that kind of thing, mainly. The Air France crew deserves all praise for managing this well, but what they were faced with was not in the same ball park with what the Qantas crew had on their plates. John Link to post Share on other sites
allardjd 1,853 Posted October 3, 2017 Report Share Posted October 3, 2017 It now appears clear that the entire low pressure section is gone, including the five LP compressor wheels and blades as well as the associated stationary blading and whatever carries those. The broken part near the hub is the aft end of a stub-shaft that carries both the fan and the LP compressor stages. It's a relatively short, hollow thing which doesn't have the look of a shaft at all. There's a "socket end" that goes over the forward end of the engine shaft and is retained by either a nut or some kind of retainer ring (can't tell which it is) and that socket end and the retainer are there. It broke off in the larger "hollow part", just forward of the socket end where it fits over the main engine shaft. There's a pretty good section of the engine missing - more than just the fan. The hollow fan shaft actually carries the forward engine bearing but the point of the break is forward of that and the bearing remains, supporting the forward end of the engine core. There is no other bearing forward of the break line - the fan and the rotating parts of the LP Compressor section are cantilevered off the front of the engine shaft and on the conical section which is where the break seems to have occurred. There is still not much in this to suggest the initiating cause or the sequence of events, though from the descriptions, it must have been sudden and something must have stopped the rotation of the core or there would have been an overspeed failure of the unloaded turbine with the fan and LP Compressor "uncoupled" from it. There are a couple of good engine cutaways here... I marked one up to give a rough idea of my take on what's gone and what remains. Link to post Share on other sites
brett 2,315 Posted October 3, 2017 Report Share Posted October 3, 2017 Nice work John. Even with all the work they do to make sure engines are tested and built to the utmost precision metal will fail. Hopefully they can pin down the failure and so they can lesson the chance of this happening again. 1 Link to post Share on other sites
hlminx 301 Posted October 4, 2017 Author Report Share Posted October 4, 2017 Wow John, that's some great detective work and very ivery nteresting to read Hey, you weren't a tin-kicker in a previous life were you? 1 Link to post Share on other sites
allardjd 1,853 Posted October 4, 2017 Report Share Posted October 4, 2017 I'm a lifetime member of the Society for Prevention of Cruelty to Machinery. I had my career in a power plant and have an engineering degree. Steam turbines have much in common with gas turbines, so I've picked up a thing or three along the way. John Link to post Share on other sites
allardjd 1,853 Posted October 16, 2017 Report Share Posted October 16, 2017 Interesting article, which contains another link to another one, about the 3-engine ferry flight being planned to get the AC back to France. It sounds a bit more complicated than "Kick the tires and light the fires..." https://www.avweb.com/avwebflash/news/Complex-Three-Engine-Ferry-For-A380-229780-1.html John Link to post Share on other sites
allardjd 1,853 Posted December 8, 2017 Report Share Posted December 8, 2017 The damaged Air France A380 finally to leave Goose Bay https://airlinerwatch.com/the-damaged-air-france-a380-finally-to-leave-goose-bay/ It seems the original plan to do a 3-engine ferry flight were changed somewhere along the way. "...the replacement engine was transported to Goose Bay on November 23 by an An-124..." "...the flight was operated on four engines..." "...confirmed to CBC News that the four engines were working." Link to post Share on other sites
wain 879 Posted December 8, 2017 Report Share Posted December 8, 2017 just reading about this in a magazine earlier, when that went to press they said 3 engine flight, I suppose though if you have the ability to fix it and get it back then why not...now I guess they will be trying to work out if anything can be done to try and ensure it doen't happen again... Link to post Share on other sites
allardjd 1,853 Posted December 8, 2017 Report Share Posted December 8, 2017 It sounded earlier when they were talking about a 3-engine ferry flight as if the certifications necessary to do that were going to be pretty involved. Flying a spare engine into Goose Bay on an AN-124 and fitting and testing it in the somewhat primitive conditions there (probably no hangar large enough for an A380) can't have been cheap or easy but in the final analysis must have been the best of a sorry set of options. John Link to post Share on other sites
dodgy-alan 1,587 Posted December 8, 2017 Report Share Posted December 8, 2017 Certainly a dramatic event, but well handled by the crew and as has been said, it shows just what a tough bird the A380 is. Things could have been far far worse had this happened over a densely populated area as several tons of engine parts slamming into a building or people at several hundred miles and hour would be similar to a bomb going off! In this case no-one was hurt and the problem will be resolved. A good result for all concerned i'm thinking. Link to post Share on other sites
allardjd 1,853 Posted December 9, 2017 Report Share Posted December 9, 2017 1 hour ago, dodgy-alan said: A good result for all concerned i'm thinking. Agreed, though maybe R-R are not the happiest of campers. John EDIT: - OOPS - Correction - make that GE/P&W. R-R are probably ecstatic. 3 Link to post Share on other sites
hurricanemk1c 195 Posted December 9, 2017 Report Share Posted December 9, 2017 A few extra photos have been published of bits "in" Greenland https://avherald.com/h?article=4af15205&opt=0 1 Link to post Share on other sites
brett 2,315 Posted December 9, 2017 Report Share Posted December 9, 2017 You have to love how they use the word 'Separated', like they just didn't like each other anymore. 1 Link to post Share on other sites
allardjd 1,853 Posted December 10, 2017 Report Share Posted December 10, 2017 1 hour ago, brett said: You have to love how they use the word 'Separated', like they just didn't like each other anymore. It was apparently a pretty instantaneous event, as in now-you-see-it, now-you-don't. If it had to happen, that's a lot better than a prolonged sequence with a massive imbalance causing severe vibration. More like leaving in the middle of the night without prior warning or a note, rather than a trial separation. John 1 Link to post Share on other sites
Captain Coffee 2,030 Posted December 10, 2017 Report Share Posted December 10, 2017 (edited) 1 hour ago, allardjd said: It was apparently a pretty instantaneous event, as in now-you-see-it, now-you-don't. If it had to happen, that's a lot better than a prolonged sequence with a massive imbalance causing severe vibration. More like leaving in the middle of the night without prior warning or a note, rather than a trial separation. John With regards to Brett's remark, your comment above very closely resembles many of my 'Separations'. However, I have to say I kind of prefer it that way, much better than a prolonged sequence with a massive inbalance. Edited December 10, 2017 by Captain Coffee 1 Link to post Share on other sites
allardjd 1,853 Posted December 10, 2017 Report Share Posted December 10, 2017 6 minutes ago, Captain Coffee said: However, I have to say I kind of prefer it that way rather than a prolonged sequence with a massive inbalance. Well, in either case, it's a matter of something that was once your fan no longer serving the function that it did previously. EDIT: With apologies to Artie and Paul, there must be fifty ways to leave your Airbus. JDA 1 Link to post Share on other sites
Captain Coffee 2,030 Posted December 10, 2017 Report Share Posted December 10, 2017 And in both cases once the separation occurs a lot of pressure is taken off, you can chill and hang out without doing a lot of work...although you tend to become a bit of a drag. Link to post Share on other sites
allardjd 1,853 Posted December 10, 2017 Report Share Posted December 10, 2017 Just drop off the 'Bus, Gus. No need to discuss much. Just shear off the key, Lee, and set yourself free. John 2 Link to post Share on other sites
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now