Jump to content
Sign in to follow this  
mutley

SimConnect

Recommended Posts

I have been asked if I could recreate a very useful post from the Froogle forums to here. I have Pete's authority to do this so here goes.

Please note I haven't changed any spelling or grammar this is the raw stuff!  :D 

So it played out like this...

viper

Hi Guys, Anybody got ideas on how to get it working.....done all that Pete said .........still will not work.......

Thanks Brian.


yakdownpete

Need a tad more info buddy,

Simconnect setup is pretty straightforward the simconnect .xml and if you are using a network setup the simconnect.cfg in the docs /installed software folder

Both files must have the same IP address - the one used by your FSX pc

On the network pc you need the three simconnect versions

That's it Here is info I have submitted previously it might help

yakdownpete said:

I'm not so sure your network setup is correct. There are three Simconnect Clients that should appear on your programs list in control panel on the networked pc

Version 10.0.60905.0

Version 10.0.61242.0

Version 10.0.61259.0

On running the Simconnect.ini and viewing the log txt file my setup reports

0.00000 SimConnect version 10.0.61259.0

To check this is connecting have a look at the FSUIPC log file in FSX modules. when connected this is the output. I deliberately changed the simconnect.cfg to an incorrect IP address and ran FSX again. FSUIPC reported the same output each time

1966 Delaying SimConnect connection ...

31981 SimConnect_Open succeeded: waiting to check version okay

31981 Trying to use SimConnect Acc/SP2 Oct07

31981 Running in "Microsoft Flight Simulator X", Version: 10.0.61637.0 (SimConnect: 10.0.61259.0)

31981 Initialising SimConnect data requests now

It is not failing to connect to simconnect. It is a network issue because I changed the IP address. No messages appear on screen - ASN simply shows -sim connection- Waiting for Simulator

If FSUIPC shows connected then you probably need to review your simconnect.xml file and simconnect.cfg to verify their content and IP address, here is the content of my working files -obviously your IP address will be different, also your path to the FSX root folder

simconnect.xml

<?xml version="1.0" encoding="Windows-1252"?>

<SimBase.Document Type="SimConnect" version="1,0">
  <Descr>SimConnect Server Configuration</Descr>
  <Filename>SimConnect.xml</Filename>
  <Disabled>False</Disabled>

<SimConnect.Comm>
  <Disabled>False</Disabled>
  <Protocol>IPv4</Protocol>
  <Scope>Global</Scope>
  <MaxClients>64</MaxClients>
  <Address>192.168.0.6</Address>
  <Port>500</Port>
</SimConnect.Comm>

<!-- Example Global (remote) IPv4 Server Configuration-->
<SimConnect.Comm>
 <Disabled>True</Disabled>
 <Protocol>IPv4</Protocol>
 <Scope>global</Scope>
 <MaxClients>64</MaxClients>
 <Address>0.0.0.0</Address>
 <Port>REPLACE_WITH_PORT_NUMBER</Port>
</SimConnect.Comm>

<SimConnect.Comm>
<Disabled>False</Disabled>
<Protocol>Auto</Protocol>
<Scope>local</Scope>
</SimConnect.Comm>
</SimBase.Document>
simconnect.cfg file content

<?xml version="1.0" encoding="Windows-1252"?>
[SimConnect]
Protocol=IPv4
Address=192.168.0.6
Port=500
MaxReceiveSize=8192
DisableNagle=1
Your FSX dll.xml file should have the following entry added to the end

<?xml version="1.0" encoding="Windows-1252"?>
<Launch.Addon>
 <Name>as_connect</Name>
 <Disabled>False</Disabled>
 <Path>as_srv\as_btstrp.dll</Path>
 </Launch.Addon>
 </SimBase.Document>
Your FSX.cfg entry

[Trusted]

P:\FSX\as_srv\as_btstrp.dll.wabbocicwuclzuneirnhinrawraaeinkkkilkaun=1

Hope this helps


viper

Thank`s for the help sir........I`ll get back to you......

Brian.


viper

Hello again,

I have managed to get SimConnect to work ....I say that, but I am not sure....I can run Plan-G software on the laptop that connects......but I cannot get TopCat to connect to FSX server or ASN. I have both programs installed on the laptop but they will not connect.

These are my files:-

[My xml file on the main machine.]

?xml version="1.0" encoding="windows-1252"?

SimConnect Server Configuration

SimConnect.xml

False

False

IPv4

Global

64

192.168.0.2

500

;

;False

;IPv4

;Local

;

;

[My cfg File on the Latop]

[simConnect]

Protocol=IPv4

Address=192.168.0.2

Port=500

MaxReceiveSize=8192

DisableNagle=1

[My ini file on the main machine]

[simConnect]

level=verbose

console=0

;RedirectStdOutTConsole=1

;OutputDebugString=1

;file=c:\simconnect%03u.log

;file_next_index=0

;file_max_index=9

I hope this enough for you to help me

Kind Regards....Brian.


viper

Hello again Pete,

I forgot this FSUIPC Log.......sorry

Brian.

******** FSUIPC4, Version 4.937 by Pete Dowson *********

Reading options from "C:\Program Files (x86)\Microsoft Games\Microsoft Flight Simulator X\Modules\FSUIPC4.ini"

Running inside FSX on Windows 7

Module base=64C10000

User Name="Brian Jennings"

User Addr="benigma56@ntlworld.com"

FSUIPC4 Key is provided

WideFS7 Key is provided

15 System time = 25/11/2014 17:58:17

47 FLT UNC path = "\\MOTHERSHIP\Users\Brian\Documents\Flight Simulator X Files\"

109 Trying to connect to SimConnect Acc/SP2 Oct07 ...

125 FS UNC path = "\\MOTHERSHIP\C\Program Files (x86)\Microsoft Games\Microsoft Flight Simulator X\"

703 LogOptions=00000000 0000000D

703 SIM1 Frictions access gained

703 Wind smoothing fix is fully installed

703 G3D.DLL fix attempt installed ok

703 SimConnect_Open succeeded: waiting to check version okay

703 Trying to use SimConnect Acc/SP2 Oct07

10547 Running in "Microsoft Flight Simulator X", Version: 10.0.61637.0 (SimConnect: 10.0.61259.0)

10547 Initialising SimConnect data requests now

10547 FSUIPC Menu entry added

10609 \\MOTHERSHIP\C\Program Files (x86)\Microsoft Games\Microsoft Flight Simulator X\FLIGHTS\OTHER\FLTSIM.FLT

10625 \\MOTHERSHIP\C\Program Files (x86)\Microsoft Games\Microsoft Flight Simulator X\SimObjects\Airplanes\Aircreation_582SL\Aircreation_582SL.AIR


yakdownpete

Thanks for the info it helps, I reckon you are almost sorted

ASN should be build 5410 the latest update

Can you check the asconnect for FSX installer has installed on your fsx pc it is vital to connection over the network it should be the asconnect. exe found in the asn folder on the laptop but copies to your FSX pc for install

Also the file sharing is setup fully The FSX install will now have a new folder called as_srv Which is the ASN folder and although it may show in file properties that it is shared you should redo it by right-clicking on share with specific people select everyone/home group with read/write and share to apply it

That should be the full setup done for a successful connection Once done do a restart of the laptop and the FSX pc then run ASN first followed by FSX and fingers crossed the FSX connected text will appear in ASN

Ensure Topcat.exe is set to run as administrator -this could be the problem as fsx is in a protected area

however Topcat uses widesFS check your FSUIPC.ini shows same as mine when wideclient is running

[WideServer]

WideFSenabled=Yes

AdvertiseService=1

Port=8002

Port2=9002

on the laptop check the wideclient.ini port numbers match

[Config]

Port=8002

Window=933,392,886,589

Visible=Yes

ButtonScanInterval=20

ClassInstance=0

NetworkTiming=5,1

MailslotTiming=2000,1000

PollInterval=2000

Port2=9002

and when FSX is running and you start WideClient on the slave computer, do you have "FSX with WideServer: 1 connected" in the FSX statusbar on the top of your screen

Under topcat the tab W&B - When export to flightsim is selected a dialog box with the following should appear

send via FSUIPC/WIDECLIENT

FSUIPC staus connected (version 4.937)

If no connection you might need to create a rule allowing the ports access via your firewall normally this should come up on the FSX pc as a dialog box when the firewall detects the network access request for ASN - a rule is easily done but check the above first

I have a shorcut to wideclient in my startup programs list on the network Pc to avoid a manual start

let me know how you get on -

by the way if you have to do an FSX re-install at some future date (god forbid) please don't install FSX into c:\programs (x86) it's the blackhole of death for add-ons under win7 or win8


yakdownpete

I should have added I also have setup PlanG3 which is working networked with ASN Topcat and FSX

PlanG has the moving map after I inputted the IP address and port for simconnect under the options fs connection section


viper

Hi Pete,

Thank you for your quick response......I try all that and get back to you.

Kind Regards

Brian.


viper

Hi Pete,

Not quite there yet, laptop crashed......SimConnect is back up and running now.......do I install asn into my network drive on the laptop or just on the laptop........the same go`s for topcat.........and wideclient, do I just run it on the laptop..or install it inside asn and topcat............I have tried to run topcat with wideclient but it say`s cannot connect with FS..............but ok with wideclient.

kind regards

Brian.


yakdownpete

Hi Brian , Ouch crashing is never good

ASN Topcat and wide client should be on the laptop hard drive only and have separate folders not connected in any way they only run on the laptop and communicate over the network with the FSX pc

what does FSUIPC.ini show in the section [WideServer]

in theory if FSUIPC is connecting to WideFS and your FSX says it is connected then sending data to FSUIPC is automatic

A firewall may be blocking the ports - if you are using windows 7 firewall then here is how to manually add a rule close wideFS program first

goto control panel

system & security

Windows Firewall

allow a program through windows firewall

scroll dow the allowed programs list - if wideclient is there - nothing else is needed

to add it -

click on add another program (you might have to scroll down to see it

click on browse

navigate to wideclient folder and the exe - click on open then add

close and start WideFS - the windows firewall request to allow access for FSUIPC should appear

click on OK

how to start widefs with your laptop - click on the start button and in the box type startup and click on startup.exe

under task click on add program

type in the dialog box WideFS then click on browse to find the wideclient.exe

click on open then OK

that's it - widefs will start with windows

Pete


viper

Hi Pete,

I have installed WideClient on the laptop in Windows C: in its own folder.........

I have done the same with Topcat

Assuming I have set up SimConnect correctly when I start both programs with FSX running every thing should work..........

Alas it wont work, When I go into W&B and click on FSUIPC connect in the box that comes up it says.......

FSUIPC Status:- Maybe running on WideClient but FS not running on server......

I have copyed the log of WideClient for you to look at from the laptop.....

Oh!...my laptop is running windows 8 And my main computer is windows7..thought I would mention that.

The Wideclient Log........

********* WideClient Log [version 6.999n] Class=FS98MAIN *********

Date (dmy): 30/11/14, Time 16:34:30.413: Client name is viper

328 LUA: "C:\WideClient\Initial.LUA": not found

359 Attempting to connect now

359 Trying to locate server: Need details from Server Broadcast

359 Failed to connect: waiting to try again

2418 Attempting to connect now

45631 Trying to locate server: Need details from Server Broadcast

336276 New Client Application: "TOPCAT" (Id=1724)

377320 ****** End of session performance summary ******

377320 Total time connected = 0 seconds

377320 Reception maximum: 0 frames/sec, 0 bytes/sec

377320 Transmission maximum: 0 frames/sec, 0 bytes/sec

377320 Max receive buffer = 0, Max send depth = 0, Send frames lost = 0

377320 **************** Individual client application activity ****************

377320 Client 1724 requests: 10 (Ave 10/sec), Data: 428 bytes (428/sec), Average 42 bytes/Process

377320 ********* Log file closed (Buffers: MaxUsed 1, Alloc 10 Freed 10 Refused 0) *********

I hope this helps you.....

Kind Regards

and thank you for all your help. Brian.


yakdownpete

Ok Brian no problem, I think we have traced the issue- it may be system not software

Here is my wideclient log from my client pc note the last 4 entries -

win 8 on the laptop is not seeing your server (simpilot is my FSX pc/ server and Pc pilot-PC is running ASN etc)

in your log no connection via the Host IP address is made

********* WideClient Log [version 6.999n] Class=FS98MAIN *********

Date (dmy): 30/11/14, Time 20:17:38.398: Client name is PCPILOT-PC

62 Attempting to connect now

62 Trying to locate server: Need details from Server Broadcast

62 Failed to connect: waiting to try again

62 LUA: "D:\WideFS\Initial.LUA": not found

2122 Attempting to connect now

45365 Trying to locate server: Need details from Server Broadcast

53602 Server = SIMPILOT

53602 Trying TCP/IP host "SIMPILOT" port 8002 ...

53602 ... Okay, IP Address = 192.168.0.2

53602 Connection made okay!

97204 New Client Application: "TOPCAT" (Id=4876)

here is my log from my FSX pc server -notice how the server is named/identified, check your wideclient log

on your FSX pc - I won't be surprised if the server is not recognised

these are the crucial verification lines

30156 Incoming connection Accepted ok (skt=4972) TCP

30406 Connected to computer "PCPILOT-PC" running WideClient version 6.999 (skt=4972) TCP

********* WideServer.DLL Log [version 7.937] *********

Blocksize guide = 8192 (double allowed)

Date (dmy): 30/11/14, Time 20:18:15.021: Server name is SIMPILOT

15610 Initialising TCP/IP server

15610 Initialising UDP/IP server

16016 Broadcasting service every 1000 mSecs

17610 Incoming connection Accepted ok (skt=10812) TCP

17703 Connected to computer "PCPILOT-PC" running WideClient version 6.999 (skt=10812) TCP

187531 Auto send stopped before sending all data (0 of 47 sent), Error=10013 (IP=255.255.255.255) UDP

194188 Close signalled to clients

195297 Closing down now ...

Memory managed: Offset records: 107 alloc, 106 free

Read buffer usage: 78 alloc, 78 free, max in session: 1

Write buffer usage: 10381 alloc, 10381 free, max in session: 1

Throughput maximum achieved: 25 frames/sec, 691 bytes/sec

Throughput average achieved for complete session: 9 frames/sec, 258 bytes/sec

Average receive rate from "PCPILOT-PC": 0 frames/sec, 18 bytes/sec

********* Log file closed **********

What is not happening is the server connection between the two Pcs possibly down to the win7 win8 arrangement and a clash of either workgroup names or network type

add the last two lines below to the wideclient.ini file on your laptop - your FSX pc name will be different

[Config]

Port=8002

Window=918,451,886,589

Visible=Yes

ButtonScanInterval=20

ClassInstance=0

NetworkTiming=5,1

MailslotTiming=2000,1000

PollInterval=2000

Port2=9002

ResponseTime=18

ApplicationDelay=0

TCPcoalesce=No

WaitForNewData=500

MaxSendQ=100

OnMaxSendQ=Log

NewSendScanTime=50

Priority=3,1,2

ServerName=SIMPILOT

Protocol=TCP

check the workgroup on each Pc if they don't match wideFs won't connect to FSUIPC

control panel > system > Advanced system settings > select Tab computer name and look at the workgroup name - the name should be the same on both Pc's --

I changed mine deliberately to a personal one, just keep it short and easy to remember. if you change it a restart will occur so save any files you have open or close software first

This might fix the issue,

If not check this

in windows explorer on both Pcs -- click on the Network to expand it

mine lists the Pcs ON BOTH as

PC-PilotPC

SIMPILOT

If both your Pcs are not shown the network connection is not working properly, check

control panel > Network & internet > network & sharing

on win 7 it should be a Home network type and win 8 it should say private network, if not you need to change it

click on connections and under ethernet status details -- both pcs should have the same default gateway IP address

Until you have a chance to check the above there is not more I can add, keep going we will get you there. it's worth it.

Pete


viper

Hi Pete,

I am 70 years of age on Feb 17th 2015 my brain is not as good as yours...........But I am determined to crack this..........please stay with me..........

Kind Regards

Brian.


]

yakdownpete

I think we are tantalisingly close to getting this sorted

I'm just a puppy at 59, I tell you the other benefit of simming, it keeps your brain sharp, well sharpish .... Lol


viper

Hi again Pete,

********* WideClient Log [version 6.999n] Class=FS98MAIN *********

Date (dmy): 01/12/14, Time 15:05:44.233: Client name is viper

249 LUA: "C:\WideClient\Initial.LUA": not found

265 Attempting to connect now

2574 Trying TCP/IP host "PCPilot" port 8001 ...

2574 ... Okay, IP Address = 192.168.0.2

3635 Error on client pre-Connection Select() [Error=10061] Connection refused

3635 Ready to try connection again

4680 Attempting to connect now

17659 New Client Application: "TOPCAT" (Id=4924)

29375 ****** End of session performance summary ******

29375 Total time connected = 0 seconds

29375 Reception maximum: 0 frames/sec, 0 bytes/sec

29375 Transmission maximum: 0 frames/sec, 0 bytes/sec

29375 Max receive buffer = 0, Max send depth = 0, Send frames lost = 0

29375 **************** Individual client application activity ****************

29375 Client 4924 requests: 10 (Ave 10/sec), Data: 428 bytes (428/sec), Average 42 bytes/Process

29375 ********* Log file closed (Buffers: MaxUsed 1, Alloc 10 Freed 10 Refused 0) *********

This is where I am at.........................

For some reason when I try and connect the network to the main computer the laptop requests a user and password, the name of the laptop/and the password of the main computer before it will connect to the main computer..........it is so frustrating, I am so close to doing this , I think this is the problem, but how to fix it that`s the question.

My Laptop is called viper..........but when I re-installed it I NAMED it Brian..... I wonder!!

All the other bits you said to check are correct..........

Kind Regards.

Brian.


yakdownpete

Ok good stuff your log confirms server is being seen but as you say just being blocked from connecting

This could be a very easy fix just follow the steps for win7 and win8 below

Windows7 your FSX pc

goto control panel > network & internet > network & sharing advanced sharing settings

look down the list and at the end there should be a heading called

Password protected sharing

check the button that says

turn off Password protected sharing

while there check also Homegroup connections and check that the button

Allow windows to mange homegroup connections (recommended) is checked

Windows8 -laptop

goto control panel > network & internet > network & sharing center advanced sharing settings

again check the Homegroup connections matches the above

then if necessary click on all networks if not already expanded and you will see the option

Password protected sharing

check the button that says

turn off Password protected sharing

to activate I suggest a restart of the FSX pc and Laptop

that should do it

Here are a couple of pics showing connections established so you know what to expect -

FSX PC

fsxclientconnected_zps12ccc2c7.jpg~origi

CLIENT PC

fsxconnected_zpse3853863.jpg~original

I don't recall If ASN is actually connecting yet - we can tackle that once this is sorted if needed plus How to connect Plan G v3 to FSX via simconnect or FSUIPC

run PlanG

click on file > select > OptionsFS connections

on screen check the box for IPv4 or IPv6 and enter the IP address for your FSX pc e.g 192.168.0.2

and the server port number- usually this is 500

For FSUIPC just check the box - fsuipc

Note -you must have wideFS installed and the wideclient application running for this to work


viper

Hi Pete,

Sorry for the delay in getting back to you....I have had huge problems with both computers but up and running again.........

I have got simconnect working and wideserver............both report OK......

But my main machine is not seeing the laptop........IE laptop......PilotPc can access SimPc mainmachine but not the other way..SimPc to pilotPc all I get is error:-Windows cannot access \\PilotPc .Your machine admistrator has disabled Teredo localy........

I do not know what that is..........do you..

kind regards

Brian.


viper

********* FSUIPC4, Version 4.937 by Pete Dowson *********

Reading options from "C:\Program Files (x86)\Microsoft Games\Microsoft Flight Simulator X\Modules\FSUIPC4.ini"

Running inside FSX on Windows 7

Module base=5F3B0000

User Name="Brian Jennings"

User Addr="benigma56@ntlworld.com"

FSUIPC4 Key is provided

WideFS7 Key is provided

516 System time = 17/12/2014 13:31:26

531 FLT UNC path = "\\SIMPC\Users\Brian\Documents\Flight Simulator X Files\"

906 Trying to connect to SimConnect Acc/SP2 Oct07 ...

922 FS UNC path = "\\SIMPC\Microsoft Flight Simulator X\"

1391 LogOptions=00000000 00000001

1391 SIM1 Frictions access gained

1391 Wind smoothing fix is fully installed

1391 G3D.DLL fix attempt installed ok

1391 SimConnect_Open succeeded: waiting to check version okay

1391 Trying to use SimConnect Acc/SP2 Oct07

11500 Running in "Microsoft Flight Simulator X", Version: 10.0.61637.0 (SimConnect: 10.0.61259.0)

11500 Initialising SimConnect data requests now

11500 FSUIPC Menu entry added

11609 \\SIMPC\Microsoft Flight Simulator X\FLIGHTS\OTHER\FLTSIM.FLT

11609 \\SIMPC\Microsoft Flight Simulator X\SimObjects\Airplanes\Aircreation_582SL\Aircreation_582SL.AIR

57859 \\SIMPC\Microsoft Flight Simulator X\SimObjects\Airplanes\PMDG 737-800NGX WL\B737-800WL.AIR

83609 Weather Mode now = Custom

99891 System time = 17/12/2014 13:33:06, Simulator time = 13:32:45 (13:32Z)

99906 Aircraft="PMDG 737-800NGX PMDG House Winglets"

100797 Starting everything now ...

101828 Weather Mode now = Theme

102063 Advanced Weather Interface Enabled

102156 Ready for ASN WX radar

194156 Sim stopped: average frame rate for last 96 secs = 21.0 fps

12537328 Sim stopped: average frame rate for last 12321 secs = 26.0 fps

------------------------------------------------------------------------------------------------------------------------------------------------------------------

******** WideServer.DLL Log [version 7.937] *********

Blocksize guide = 8192 (double allowed)

Date (dmy): 17/12/14, Time 13:33:07.283: Server name is SIMPC

15531 Initialising TCP/IP server

15547 Initialising UDP/IP server

16047 Broadcasting service every 1000 mSecs

H1 Pete, these are my logs for FSUIPC and WIDESERVER..........are they OK.......

Brian.


yakdownpete

Hi Brian very sorry to hear you have had problems, glad you are up and running again

FSUIPC log looks good, are you now using topcat ASN etc on the laptop connected to FSX

If you have not setup sharing of specific files and folders on the laptop your main sim pc won't be able to access files on the laptop. In theory your main sim pc doesn't need to access the laptop to run the software. As a test try setting sharing on your topcat folder or any folder on your laptop and see if you sim pc can access it - it should be able to

I use a nifty little piece of software to access both my network and sim pc using one keyboard and mouse

it's called Inputdirector and for non commercial use it is free. I simply move the mouse to the edge of the main pc screen and it magically appears on the second pc screen, the mouse and keyboard then work on PC2, when I move it back to the main pc, the mouse and keyboard work on the main PC it is seamless and works really well.

If you want to give it a try and need help setting it up (it's not complex) drop a post on the forum

Link here for Inputdirector : http://www.inputdirector.com/downloads.html


viper

Hi Pete,

I must be a bit thick Pete, my laptop will not talk to the main machine... I just rebooted the laptop and input a user and password..then it connects the shared drive........I did what you advised and shared WideFS which is on my laptop and when I clicked on PILOTPC on the left under network it found it.....So what files and folders do I need to share to make it all work........I think I am nearly there


yakdownpete

Hi

can I check did you do this

Place WideServer.dll and WideServer.Ini in the Flight Simulator Modules folder, inside your main FS folder. The files are in the wideFS folder on your laptop

It's a short list of folders on your sim PC that should be shared, once a folder is shared all the files inside it are shared automatically

c:\users\%username%\appdata\roaming\Microsoft\FSX

C:\Program Files (x86)\Microsoft Games\Microsoft Flight Simulator X (your fsx install folder)

c:\users\%username%\documents\microsoft flight simulator files

I just re-installed win7 and fsx on my sim pc and had a problem with wideFS until I remembered that both Pcs must have the same workgroup name

check this from

control panel > system & security > system

scroll down and you will see the workgroup name -


viper

Hi Pete,

I have done everything you said to do and TopCat will not connect with the main machine or Plan-G,...... Simmconect will not connect nor will WideFS,.....It is not finding the main machine.......it is not finding the server.........This teredo thing on the main machine has something to do with this..how do you turn this thing back on...???...its stopping the connection between the two computers........This is killing me.Grrrrrrrrrrrr........

Kind Regards

Brian.


yakdownpete

Hi Brian

what a bummer, Ok, teredo is a network /internet protocol Ipv6 that is usually dormant under windows 7 and windows 8 and usually give no problems

Option1 - lets see if the device has a valid driver and is working - follow this

control panel > system & security > system

select - device manager

on the menu select - view

check - show hidden devices

expand network adapters

teredo tunnelling device should be listed

if it has a little yellow square it has no valid driver (right click on it and select properties)

does it say device is not working

select driver

if no driver is shown you need to select - update driver then search automatically

if it updates and looks the same as the other devices it should now working correctly - but do a reboot to let windows save the change.

Option 2 - is dependant on what happens with option 1 - if the device is working and you still have a problem connecting follow this

control panel > network & internet > network and sharing > select change adapter settings

right click on the adapter shown and select properties and uncheck the IPv6 box

Option 3 - if this does not work

I disabled the teredo device on my sim Pc by selecting the device right click and choose disable

My network PC does not have this device and every programme still connects OK over the network with this disabled


viper

Hi Pete,

Got rid of Teredo............Now,.....Windows is telling me to make sure that the device IE:-PilotPc allows incoming connections for file and printer sharing....how do I do that.........

Kind Regards

Brian.

PS:-.......You are a STAR..........


yakdownpete

Ok this is pretty straightforward

do this on both PCs

go to control panel > network & internet > network and sharing center

select - change advanced sharing options and make sure the following are checked

turn on network discovery

turn on file and printer sharing

scroll down to homegroup connections and ensure

allow windows to manage homegroup connections is checked

try this to see if all connects - if not you need to do a bit more

go back to network and sharing and select Homegroup and check every box under share libraries and printers

this creates a homegroup

when it creates a password accept it then Ok it - then select change the password - and make it something simple as you will repeat on the other PC but on second PC this time you should have an invite to join the homegroup - go with it and input the homegroup password you typed yourself.

good luck - my fingers are crossed.


viper

Hi Pete,

I am so lost in all this ........my wife hates me... not true........ but I have to get it working....leave it till the new year .................................Thank you for all your help ........Have a great Christmas & New year..........You are a star.......*


yakdownpete

Ok Brian

You have had a mountain of issues to climb especially delving into the ugly side of computer setup, I recall when I first setup a networked sim it took me an age as I had to learn what things do and how they work, I swear I have more grey hair as a result.

I totally understand where you are at, taking a break can really help as it is easy to get overwhelmed.

Best wishes and I look forward to helping you crack this in the new year when you feel recharged.


viper

Hi Pete,

Me to..........Thank`s.........


viper

Hi Pete,

Happy New year to you.........I am happy to report that my network is up and running... I think.........FSUIPC is working with TopCat...Both computors are talking to each other..............Now the bad news......Simconnect still refuses to connect with Plan-G and I have tried every thing I know to get it to connect but it still evades me.......I will try and get all log files together and the ini,xml,cfg files...... + the FSUIPC logs and get back to you..........Any comment is accepted.

Kind Regards

Brian.


yakdownpete

Hi Brian , happy new year to you too

I reckon to get simconnect sorted I think it would be a good idea to setup the simconnect log file

On your main PC

1. create a new empty folder called logger under c: drive (c:\logger)

2. create a text file using notepad

3 Copy and paste this text into the file

[simConnect]

level=verbose

console=0

RedirectStdOutToConsole=0

outputDebugString=1

file=c:\logger\simconnect%03u.log

file_next_index=9

file_max_index=9

4. call it - simconnect.ini and save it in the folder c:\users\%username%\documents\Flight Simulator X Files (it's where your fsx save flights are stored)

run FSX - 1 minute is more than enough

close FSX as normal and wait for everything to close, then goto file explorer and look in the folder c:\logger

In it should be a file called - simconnect000.log ( each time you run FSX a new log file (max9) will be created

if you get to 9 just delete the old ones

This is the content of the first few lines - it is all you need

[simconnect working]

0.00000 SimConnect version 10.0.61259.0

 0.01063 Server: Scope=global, Protocol=IPv4, Address=192.168.0.2, Port=500, MaxClients=64
The highlighted text means your simconnect.xml file is coded correctly as a valid xml file, the extra lines below this indicate what add-on DLLs are activated by FSX

[simconnect failed - I disabled my fsx simconnect.xml file]

0.00000 SimConnect version 10.0.61259.0

0.00175 Server: Scope=local, Protocol=Pipe, Name=\\.\pipe\Microsoft Flight Simulator\SimConnect, MaxClients=64

check the versions of simconnect on your laptop under control panel > programs there should be

Microsoft flight simulator simconnect client v10.0.61259.0 which is for FSX SP2 \Acceleration

To check simconnect is linking up on the client (laptop) we need to install the FSX sdk on your laptop - to do this you need FSX disk1 and the Acceleration disk

Put disk1 in your laptop and navigate to the folder SDK and run the setup.exe file. the default location is Ok

once done put in your acceleration disk and navigate again to the SDK folder and run the setup.exe

Ok the file to test simconnect is in the location

C:\Program Files (x86)\Microsoft Games\Microsoft Flight Simulator X SDK\SDK\Core Utilities Kit\SimConnect SDK\Samples\AI Traffic

Run FSX it must be active , then run the file A1 traffic.exe by double clicking on it. If simconnect is connecting to the client a windows dialog box will appear on the laptop and the text will say

Connected to Flight Simulator!

Received:2 (other some other number)

If the dialog box just opens with nothing the link via simconnect is not working.

probably enough for you try for now, but post again when convenient with the results


viper

Hi Pete,

I have done that ..there is nothing in the logger folder....You say create a new empty folder called logger under c: drive (c:\logger.....I don`t under stand.

What I have done is.......Made a new folder called it logger and put that in the c Drive.........then copyied the simconnect.ini text into a text file........and named it simconnect.ini....... and put that where you said......and run FSX..........nothing in the logger folder ..........?

Sorry, I must be thick....

Brian.


yakdownpete

hi

You got the instruction ok and the folder is in the right place.

I had to get you to make a folder cos when I tried the default location on my main sim pc which is just c:/ it refused to create a log file, hence the new folder request ,

but my sincere apologies, I'm an idiot, in line 7 the text file next index I should have changed it to = 0 to reset the log count, as it stands the max log count is preventing a new log from being created.

I was testing this and forgot to reset it.

the SDK install is the real test for a simconnect over a network


viper

Hi Pete,

Nothing in the logger folder.............and the test on the laptop with the SDK samples..AI Traffic just opens and shuts and that`s it......

Brian.


yakdownpete

Ok the fact that the SDK test is blank is definitive - simconnect is not connecting to the laptop over the network

just did a test - for simconnect to work you need the file simconnect.cfg in the documents folder of your laptop. I forget to disable it on my network pc when previously testing and when I disabled it the A1 traffic test failed. Enabled it and the test passed.

The cfg file is for the laptop and goes in the location

C:\Users\%username%\Documents

If you want to just create one - use notepad and save the file as simconnect.cfg

and use save as type All Files ( ) then add this text

[simConnect]

Protocol=IPv4

Address=192.168.0.2

Port=500

MaxReceiveSize=8192

DisableNagle=1

alter the line Address= in the cfg file to show your IP address for the main pc

I honestly don't know how I missed it. Fingers crossed this is the last piece of the jigsaw -I have a good feeling about this!!

I also added 3 files to dropbox that I know are good for safety- just click to download and by all means check them through your antivirus software - I want you to 100% confident they are safe.

simconnect.xml

simconnect.ini

simconnect.cfg

do the CFG file first and hold the other files in reserve

For info:

In the xml doc the only change needed is to the IP address

The ini file I have changed the location for the log file to simply C:\

This means the log files will appear directly in the c:\drive - no other folder is required and I took away the limit to number of log files

https://www.dropbox.com/s/51pymnaif9g4d93/SimConnect.cfg?dl=0

https://www.dropbox.com/s/mi6p9ef6rlo86qr/SimConnect.ini?dl=0

https://www.dropbox.com/s/k85ofijq04iz4s0/SimConnect.xml?dl=0

as before save the xml on main pc location C:\Users\%username%\AppData\Roaming\Microsoft\FSX

save the ini file in the location

C:\Users\%username%\Documents\Flight Simulator X Files

If this works then going forward any software you add to the laptop that uses simconnect should have a copy of the cfg file added to it's root install folder -still keeping the one in the documents folder.


viper

Hi Pete,

The state of play at the moment is........Simconnect has connected with Plan-G Topcat works......WideFs works.........FSUIPC states that it has connected .......Now the bad news.......AI Traffic test on the LapTop still does not...it opens and closes as before.....and the test on the main machine I carn`t find the log file which tells me simconnect is coded correctly.........

Brian.


viper

Hi Pete,

Just installed ASN onto my LapTop and it works................I think we have done it mate....

Just the above that doesn`t work........I still carn`t find these test logs it keeps making them up to 5 now but where are they..?

Kind Regards

Brian.


yakdownpete

Hi Brian

I am over the moon (-: (-: - well done buddy - you have cracked it.

ASN will only connect to your FSX pc if simconnect is working over the network

In terms of the log files they don't exist, I don't know why, the counter will go up as it is not dependent on there being an actual file, a fact I discovered when researching it.

If you want to know for sure

I used the dropbox ini file just to check it works and it still does but you can try

a different drive if your main Pc has more than one drive it worked for me in testing just change the location to anything you want but keep the file name SimConnect%03u.log

change this line

file=c:\SimConnect%03u.log

for example if you have a drive named E

E:\simlog\SimConnect%03u.log and make a folder called E:\simlog

The sdk test may be failing because I have the following entries in my my dll.xml

file in location

C:\Users\%username%\AppData\Roaming\Microsoft\FSX

pretty sure they were added automatically when I first installed the acceleration pack in FSX

Launch.Addon

NameObject Placement Tool/Name

DisabledTrue/Disabled

ManualLoadFalse/ManualLoad

Path..\Microsoft Flight Simulator X SDK\SDK\Mission Creation Kit\object_placement.dll/Path

/Launch.Addon

Launch.Addon

NameTraffic Toolbox/Name

DisabledTrue/Disabled

ManualLoadFalse/ManualLoad

Path..\Microsoft Flight Simulator X SDK\SDK\Environment Kit\Traffic Toolbox SDK\traffictoolbox.dll/Path

/Launch.Addon

Launch.Addon

NameVisual Effects Tool/Name

DisabledTrue/Disabled

ManualLoadFalse/ManualLoad

Path..\Microsoft Flight Simulator X SDK\SDK\Environment Kit\Special Effects SDK\visualfxtool.dll/Path

/Launch.Addon

If you want, you can check the file for this text but I don't think it is worth bothering about now - just enjoy the moment and your flying, believe me you deserve it for sticking with this.

Boy am I happy,....lol


viper

Hi Pete,

I am a very happy old person, it has been a long and frustrating time for me but with your help and dedication we have done it,

I don`t no how to thank you enough................You are a STAR...........

Kind Regards

Brian Jennings.


yakdownpete

you are truly welcome Brian.

I love Flight simming because it is open to all, age is no barrier. If I can aid others to enjoy their flying it's the icing on the cake for me.

All the best

Pete


viper

Hi Pete,

I have installed Rex essential + overdrive HD on my LapTop but how does it connect with my main machine via Simconnect or WideFS ........What do I need to do to make this work..........and open FSX from REX.

Kind Regards

Brian.


viper

Pete ...I got the SDK test to work Brill..........just thought I would let you know......

Brian.


yakdownpete

Hi Brian

That's great re the sdk test, there's not much I can teach you now.

I confess I have never tried rex essentials over a network. However I did install it on my network pc to test it

In the main REX config page -simulator folder location - I put the shared FSX root folder location

So far I can confirm it uses simconnect. I disabled the simconnect.cfg on the network pc and it failed to inject weather re-instated it and the weather injected correctly not sure about the textures but it seems to be OK.

I put a copy of the cfg in the root folder for rex as a precaution.

Unfortunately it refuses to start FSX on main Pc and I get a message saying insufficient disk space - I ignored it and just started FSX normally myself and then clicked on REX - load weather - and bingo weather update appears in sim with clouds/fog etc.

The main issue to run a program such as FSX/REX from one Pc on another network Pc (i.e remotely) is a real bugger. I will take a look at it. hold off re-installing REX on main Pc.


viper

Hi Pete,

I am sure you can teach me a lot Haha........and thank`s for getting back to me..I look forward to getting this sorted and working.

Brian.


yakdownpete

Hi again

Ok - this can be done (-: (-:

follow these steps

1. on the laptop, basically do what you did for your fsx folders and share the REX install folder with your main sim PC

2. on your main sim pc

navigate using windows explorer to the REX folder on the laptop & right mouseclick on the file Rex.exe & select send to desktop create shortcut on desktop

3. right mouseclick on the shortcut on your main PC desktop & select > properties > compatibility tab

set for all users / check the box - run as administrator - click on OK to exit

3. click on the shortcut - it should now run the REX interface - nothing will appear on your laptop

4. select the config mgr page once the weather data has downloaded > and choose browse > navigate to the FSX root folder on your main sim PC > click on it and then click on OK

Rex should now inject textures and weather into your main sim PC FSX and run it from - Fly now -

Note - textures take several minutes to install- this is normal regardless of rex on same pc or network

You can minimize the Rex weather window when FSX is running by right mouseclicking on window border and choose minimize

Phew !!.....lol - I tried this setup and it works fine for me.


viper

Hi Pete,

I did everything you said and got to the Compatibility part, and could not set administrator privilege so had to do that from the icon it self..........Still not sure if it all worked because it will not start FSX..........?

Brian.


yakdownpete

Hi Brian

I have a dual boot PC with win 7 and win8 and two valid FSX installs - each OS in on a separate drive. The reason I mention this is because - for the purposes of this test - they are seen by each operating system as two entirely separate PCs

I redid the setup under win 8 and win 7 and both worked immediately after setup.

can you confirm - Does REX actually start on your main PC when you click on the icon ( the compatibility part is not that important -win 8.1 allowed it win7 doesn't -so ignore for now)

When Rex starts - does it download the weather /airport data etc

In this screen does your FSX root folder path appear correctly on your main PC

https://www.dropbox.com/s/vl2v2qzma5iio6b/rexremote1.png?dl=0

check this on your laptop. shut down REX on main pc and open it on your laptop - does the config show your main sim PC FSX path

Did a short vid to show what it looks like when working

Best viewed in HD 1080p


viper

Hi Pete,

I guess you know what I am going to say.......I do not understand this......

I confess I have never tried rex essentials over a network. However I did install it on my network pc to test it

In the main REX config page -simulator folder location - I put the shared FSX root folder location...???

It did not work.......you are way above my head.......sorry............

Brian.


yakdownpete

hi Brian

looking back i forgot you have ASN - I assume rex essentials is for textures only

In order to open FSX automatically. the REX essentials program has to be ---opened --- by the same pc that has FSX installed. but Rex doesn't have to be installed on that pc

It wouldn't accept a shared path when I initially tried it.

on your laptop go into rex essentials and in the config box type the actual path to fsx on your main pc. mine is simply C:/FSX. thats all you need to do

It's the shortcut on your main pc that is pointing to the rex executable file on your laptop. REX is being opened remotely by your main pc when you click on the shortcut

you have full access to all the features of the ReX application you can install textures and click on -- Fly now -- REX should now start FSX quite happily.

hope this helps


viper

Hi Pete,

Just a short message to tell you that everything is now working, and to thank you again for all the help...

Kind Regards

Brian.


nhlking89

Hi Pete,

I have a little problem. Is SimConnect not working with win8. I tried workgroup on each everythine and is not connecting to my FSX pc with win7. And i have only 3 folder in my documents in win8.

Best Regrads

Marcel


viper

Marcel, I have the same set up as you FSX pc win7 and a laptop running win8.1 simconnect runs ok.........follow the instructions that are above and it will work.......

Needs some work though it took me 4 months to get mine working.......good luck.

Brian.


nhlking89

So now my next Problem, the Connection ist running between the FSX and ASN. But i get the error message from ASN,

ASN cannot control ambient weather parameters correctly, thus it cannot function properly

at this point and will shut down. Please make sure you have proper rights/ownership of the Programm Files(x86) folder an have trusted/excluded

ASN from your security software, as well as the simulator's as_SRV folder and included.dll modules.Networked setups also need port 445 opened.

Have someone a idea on this?

Best Regrads

Marcel


yakdownpete

Hi

That particular error usually appears when the ASconnect for fsx installer has not been installed correctly or is the wrong version based on which ASN version is installed on your FSX Pc (if using a networked setup )

The correct version is created by your ASN install therefore you will find it in the ASN install folder on your network/second PC

I would run/re-run the asconnect.exe file on the FSX pc but right mouseclick /select run as administrator to re-install it correctly

YKDP

  • Like 1

Share this post


Link to post
Share on other sites

Hi Joe,

 

Thank`s for all the work you have done on porting Simconnect over to the hanger........great job..............

 

                                                                         Brian.

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Sign in to follow this  

  • Recently Browsing   0 members

    No registered users viewing this page.

×
×
  • Create New...