Jump to content

Unsigned Saitek 64-bit Drivers


Recommended Posts

I am trying to load 64-bit drivers for my Saitek X55 throttle and stick and I have hit a big problem.

 

The drivers for these two devices are not signed, so Win 7 Pro 64-bit will not use them. Other Saitek drivers are just fine its only the X55 ones that have a problem and this renders my throttle and stick unusable.  I have tried to use the 32-bit drivers but saitek's install program is not allowing me to install them on the 64-bit platform.

 

Has anyone else had this issue? Its a real pain in the proverbial. I have found a way to load them but it is not very elegant and involves putting windows into a test mode to enable the drivers to load.If I want to use my throttle and stick then I have to run in test mode, with text in the lower right hand corner telling me that I am in said mode.

 

J.

 

Edit.  I have opened a ticket with Saitek to see if they can resolve this issue.

Edited by J G
Link to post
Share on other sites

I'm wondering if you even need them. Take this with a bit of caution because I was not trying to setup the identical stick.

 

I had fits trying to set up the X-52 stick and throttle arrangement in my 64bit Win7 computer. After days of hair-pulling, I read somewhere that I should get rid of any and all Saitek drivers and all references to them. Then setup the joystick using the native win7 joystick software.

 

Another caution; we're now talking about the infamous "Registry". I'm afraid I'm a long way from my desk (in time and space) so cannot be more specific. Start with a query on AVSIM. As I recall, that's where I found the answers.

 

Later on, I switched to 100% (paid) FSUIPC tuning of the joystick(s) and I've been much happier with that route.

Link to post
Share on other sites

Thanks guys for your help.

 

I am waiting for Saitek to get back to me on the ticket I submitted and I want to see what they have to say. I have to say the it seems pointless creating a driver if your customers cant use it.  I also use a Saitek Pro Flight three leaver throttle quadrant and some other saitek stuff all of which install their drivers with no problem at all, I guess they are all signed.

 

To be honest I am not hopeful that there will be a satisfactory outcome with this issue.The interweb is full of folks having the same issue as me, there must be literally hundreds of them if not more. I am sure that a large number of them have contacted Saitek as the stick is a few years old now and yet nothing has been done.

 

I will see what they say and keep this thread updated as and when.

 

@Quickmarch.  The stick has two software download that come with it; the driver software and the configuration and management software.  The latter can be replaced by FSUIPC licenced but to get anything to see the stick you do need a driver as far as I can see. With no driver there is no recognition of the stick anywhere sadly.

Link to post
Share on other sites

Sorry, if I'm leading you down the garden path here. I'm internet-challenged for the next few days - spotty reception or I'd try to find the info that I used to fix the X52. Heck, maybe the X-55 is different enough that that solution won't work, but I find that hard to believe. I'm willing to bet that the differences between joysticks are in the hardware, not in how Win7 handles the interface.

 

I thought that Windoze came with a native set of drivers that allowed use of a joystick/gamepad/etc. Did you do any research on AVSIM - I'm pretty sure that's where I got the info to cure my problem?

Link to post
Share on other sites

I have yet to look at AVSIM but will do ASAP.  Earlier Saitek devices seem to install  their drivers well and, for example I have a Saitek throttle quadrant that is just fine, I have other Saitek devices that are all older than the X55 and they are all OK.  It seems to be limited to the X55. 

 

I have, in a previous FS setup, installed the X55 drivers successfully into a Windows 32-bit environment.

 

So far the Saitek support have given me instructions on how to install the drivers manually. It is very complicated and drawn out process.  I have yet to give this method a try.

Link to post
Share on other sites
  • 2 weeks later...

From my experience you will grow old, grey and go nutz in the head before Mad Katz do anything !

 

I had a desk full of Saitek which worked fine until one day I had a rush to the head and bought an extra component.  Big mistake.

When I had to download for it,  nearly everything else went tits-up.  Struggled on and off for a week.  In the end I decided that I would approach it professionally;   dampen my towering rage and plan it the same way I would any job.   I worked out how much of my time in dollars I would spend and then set out on Google to find a genius.  I had decided to spend 2 x 8 hour days and I did that without resorting to alcohol.   There are loads of people out there with Saitek Driver problems. Nothing from Mad Katz of course.

 

In the end I unbolted the whole lot;   and by a fine coincidence there was a builders skip (dumpster) in my yard and in they went.  Lock, stock and barrel !

 

I started again with a different combination of manufactures  .   Expensive yes.   Compared to resulting counselling and therapy;  very cheap.  Now I know there will be plenty of people who swear by Saitek.   I would give up siming entirely before I wasted money on a single screw of their products.    See?  The rage still simmers !

 

Good luck to you anyway.   Rick

  • Like 1
Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Recently Browsing   0 members

    No registered users viewing this page.

×
×
  • Create New...