Jump to content
tomjon24

i9 9900k Asus Motherboard and P3D

Recommended Posts

I should of also asked, I will be running P3D V4 with this unit.

Tom Johnson

Edited by tomjon24

Share this post


Link to post
Share on other sites

Your wish is our command Tom.

As for your thoughts on the i9 CPU, it's will be perfect for P3D.

I'm almost jealous. 

Good luck with the build and let us know how you get on with it. 

Cheers

Brian

Share this post


Link to post
Share on other sites

Certainly top of the line. Haven't read anything bad about them or being used together so the only thing to think about is the fact that they are new so any problems, if any, will take some time to come out. That's not to say I wouldn't mind having them.:D

Share this post


Link to post
Share on other sites

sounds like a very powerful combo, what other hardware will you be using/ GPU, RAM?

my system is as follows 6600K, Z170A MOBO, 1070 @ 8GB & 16GB RAM @ 2400, I run p3d4 at quite high settings with AivlaSoft, REX and loads of ORBX, using aircraft from Aerosoft, QW & iFly to name a few and locked at 30fps I get no issues apart from around Heathrow, all runs smoothly most of the time, biggest issue people do miss though is stuff in the background bogging down the system....hat are you upgrading from and how does that perform?

Share this post


Link to post
Share on other sites

Right now I am using the following:

Intel i7-5960X OC 4.4

32.0 GB Memory 

Win 10 Pro 64-bit

1080 TI not OC

Asus Rampage V Extreme

Corsair H110 Liquid CPU Cooler

I bought the GF Airliner system with the GF Pro yoke and the GFRP-2 Rudder.

I am unhappy with the yoke. It has to much dead band sideways and push-pull. It also sticks. The other day I smeared petroleum jelly on the yoke surfaces and it helped.

I also re-did the springs and installed rubber bands on the elevator pots inside to reduce the dead band. I would like to get YoKo the Yoke in the future.

Tom Johnson

 

 

Edited by tomjon24

Share this post


Link to post
Share on other sites

The system I just ordered and will be here the last of this week is as follows:

i9 9900 K CPU

Asus Rog Maximus XI

Asus Rog GeForce GTX 1080 Ti DirectX 12 STRIX-011G Gaming 11GB  Switch from the old computer

Corsair Crystal 570X RGB Mid-Tower

Samsung 970 PRO Series - 1TB PCIe NVMe - M.2 Internal SSD Black/Red (MZ-V7P1T0BW)

Patriot Viper Gaming RGB Series DDR4 DRAM 3600MHz 16GB Kit - Black - RGB Color Profiles

Corsair AX 1220i Power Supply

Three BenQ 31.5 " curved Monitors. Existing 

CORSAIR Hydro Series H110i AIO Liquid CPU Cooler, 280mm Radiator, Dual 140mm SP Series PWM Fans, Advanced RGB Lighting and Fan Software Control

I hope that this will cool the CPU with it OC to 5.0 If not I will have to upgrade.

Do any of you use P3D Pro Plus. I have rented it but have not taken the time to set it up.

Tom Johnson

Edited by tomjon24

Share this post


Link to post
Share on other sites

such a satisfying feeling when you get it all together, press the button and it fires into life.......happy days..

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×