dodgy-alan 1,587 Posted February 5, 2017 Report Share Posted February 5, 2017 PZL Mielec M15 Belphegor. The worlds only jet powered biplane, first flown in 1973. It was designed to replace the Antonov AN-2 for covering the huge farmland areas of Russia. It had one pilot and could also carry two ground crew. the insecticide chemicals were carried in the large hoppers between the wings. It remains to this day, the worlds only jet powered cropduster, the worlds only jet biplane and the worlds slowest production jet aircraft. It was only ever used in the USSR and was found to be very expensive to operate. This is a freeware model for FSX. 2d panel only and a non function VC, but worth having for it's uniqueness. pzl_m-15_belphegor.zip Thanks for viewing. Link to post Share on other sites
Captain Coffee 2,030 Posted February 5, 2017 Report Share Posted February 5, 2017 (edited) Congratulations on a rare find Alan: A plane ugly and slow enough that even I won't fly it. (not having a working VC of course gaurantees the bail out) I'm guessing it doesn't have a smoke converted to a multi-stream crop spray system? Or I suspect you would have a shot of it dusting a field given your penchant for low-flying/On the Deck bombing prettty much everything you fly. If not, it would be worth making one for this...might take a bit of fiddling with the up/down/left/right settings, to make the 8 or so steams come out of the nozzles, but would look cool. As I probably won't ever down load this...here is a smoke system I made for the Fletcher if you wish to use it there, or as a guide to making one for this bird. //[SMOKESYSTEM] Original Fletcher //reference datum,longitudinal,lateral //smoke.0=0.00, 0.00, 0.00, fx_Topdressing.fx [SMOKESYSTEM] //Coffees version for Fletcher using Alabeo PA36 smoke effects...swap fx_cropdustpa36 and fx_vortexpa36 with the original fletcher Topdressing.fx effect if you have it, or stock smoke effect fx_smoke_w as you prefer smoke.0= -7.80, -0.1, -1.3, fx_cropdustpa36 smoke.1= -7.80, -0.6, -1.3, fx_cropdustpa36 smoke.2= -7.80, -1.2, -1.3, fx_cropdustpa36 smoke.3= -7.80, -2.0, -1.3, fx_cropdustpa36 smoke.4= -7.80, 0.1, -1.3, fx_cropdustpa36 smoke.5= -7.80, 0.6, -1.3, fx_cropdustpa36 smoke.6= -7.80, 1.2, -1.3, fx_cropdustpa36 smoke.7= -7.80, 2.0, -1.3, fx_cropdustpa36 smoke.8=-35.00, -0.8, -2.3, fx_vortexpa36 smoke.9=-35.00, 0.8, -2.3, fx_vortexpa36 smoke.10=-15.00, -1.63, -2.3, fx_vortexpa36 smoke.11=-15.00, 1.63, -2.3, fx_vortexpa36 smoke.12=-55.00, -5.8, -2.3, fx_vortexpa36 smoke.13=-55.00, 5.8, -2.3, fx_vortexpa36 Edited February 5, 2017 by Captain Coffee 1 Link to post Share on other sites
dodgy-alan 1,587 Posted February 6, 2017 Author Report Share Posted February 6, 2017 As much as I'd love the idea, I wouldn't have a clue when it comes to fiddling around with stuff like that. To me, diving into aircraft files is the work of the Mysterons! I leave that to the professionals. I can just about add a new skin! Anything else, forget it. Thanks anyway though Matt. 1 Link to post Share on other sites
Holdit 106 Posted February 6, 2017 Report Share Posted February 6, 2017 (edited) Aaaarrggghhhh!! My eyes!! Edited February 6, 2017 by Holdit 3 Link to post Share on other sites
wain 879 Posted February 6, 2017 Report Share Posted February 6, 2017 sorry its a no from me.....each to his/her own......good shots but it is just uurrrggghhh.... 1 Link to post Share on other sites
Lucy.P 168 Posted February 6, 2017 Report Share Posted February 6, 2017 I would, just for it's uniqueness, but it's the lack of a working VC that says 'no thanks' 1 Link to post Share on other sites
Captain Coffee 2,030 Posted February 6, 2017 Report Share Posted February 6, 2017 (edited) 17 hours ago, Holdit said: Aaaarrggghhhh!! My eyes!! I LOL'd so hard. Alan, I do want to see you smoke a field with this , so I downloaded it to make a smoke system for it. So, it Has a smoke system, "i" key to activate, but it runs out quickly for some reason. Not sure why as that goes beyond my Mysterion .cfg Skills. regardless, It looked rather Fat for a crop smoke effect and came out of the center of the biplane wings, so I tweaked it a bit using the stock Extra-300 white smoke effect. Also, It does have a VC, but not a very functional one, just throttle and flap controls, and the indicators don't work...you have to use the 2D panel for working indicators, but at least you can hop into a 3d cockpit if the non-moving 2d cockpit interferes with views while trying to avoid trees . speaking of views, I modified that section so that you actually sit in the pilot seat rather than two feet back behind a bulkhead...helps the tree views again. I made these to replace the stock sections...use if you like, make a copy of your aircraft.cfg first in case you don't like the results. Cheers, Matt. [smokesystem] smoke.0 = -5,-25, -1.0, fx_smoke_w smoke.1 = -5,1.04, -1.0, fx_smoke_w smoke.2 = -5,-24.69, -1.0, fx_smoke_w smoke.3 = -5,-23.51, -1.0, fx_smoke_w smoke.4 = -5,-14.25, -1.0, fx_smoke_w smoke.5 = -5,-11.38, -1.0, fx_smoke_w smoke.6 = -5,-22.61, -1.0, fx_smoke_w smoke.7 = -5,-12.87, -1.0, fx_smoke_w smoke.8 = -5,12.8, -1.0, fx_smoke_w smoke.9 = -5,22.26, -1.0, fx_smoke_w smoke.10 = -5,11.52, -1.0, fx_smoke_w smoke.11 = -5,13.83, -1.0, fx_smoke_w smoke.12 = -5,23.44, -1.0, fx_smoke_w smoke.13 = -5,24.9, -1.0, fx_smoke_w smoke.14 = -5,25, -1.0, fx_smoke_w [Views] eyepoint=11.5, 0, 0.662 //(feet) longitudinal, lateral, vertical distance from reference datum Edited February 6, 2017 by Captain Coffee 1 Link to post Share on other sites
dodgy-alan 1,587 Posted February 6, 2017 Author Report Share Posted February 6, 2017 Thanks Matt, I'll have a look tomorrow. Link to post Share on other sites
Holdit 106 Posted February 8, 2017 Report Share Posted February 8, 2017 On 06/02/2017 at 19:06, Captain Coffee said: I LOL'd so hard. Hmmph...I'm glad you find it so amusing. My counselling starts tomorrow... 2 Link to post Share on other sites
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now