johan 0 Posted February 4, 2018 Report Share Posted February 4, 2018 Hi All, Does anybody know how to set up 3 monitors with FSX? I am using graphics card GeForce GTX1060 6gb. Thanks, Johan Link to post Share on other sites
CAT3508 341 Posted February 4, 2018 Report Share Posted February 4, 2018 It makes no difference which simulator you are using, If your card has the appropriate connections, you are good to go. I have been using 3 monitors for years, FS9, FSX, and now P3D. you should have at least 2 DVI connections, and a few DP's on your card, so provided you have the correct cables, it's just a case of plugging them in and them setting them up in the Control Panel , Display section , as to how you want them to show on your monitors. Cheers 1 Link to post Share on other sites
hlminx 301 Posted February 4, 2018 Report Share Posted February 4, 2018 I use a Triple Head to Go for my 3 screens... but I've got a less meaty graphics card. Welcome to the 3-screen gang.. you won't be disappointed!! 1 Link to post Share on other sites
johan 0 Posted February 4, 2018 Author Report Share Posted February 4, 2018 Thanks cat3508 and hlminx for your quick response, I appreciate it. Link to post Share on other sites
johan 0 Posted February 6, 2018 Author Report Share Posted February 6, 2018 Hi hImim, my 3 monitors problem. I have been using a Matrox Triple Head 2 Go digital edition, Maybe It is possible to use it again with my. new PC, Window 10 , graphics card Geforce GTX 1060 . I hope that you can help me , how to set it up,reg cables, connection , ect Johan, Link to post Share on other sites
hlminx 301 Posted February 7, 2018 Report Share Posted February 7, 2018 (edited) Hi Johan Its such a long time since i set it up, and i've kept Win7, so im not sure how much i can help, but the user guide is pretty straightforward. You need to make sure you have the Matrox Power Desk SE software installed, and GXM from the disc that came with the hardware. Make sure you follow the connection instructions for the cables as per the User Guide. One lead from the PC, then 1 lead from each of the ports in the TH2G to each monitor. For me the Windoze settings were Display: 1 device on DVI, Res = 3072x768 and Orientation landscape. That will give you one window across all 3 screens In FSX, you don't use Windowed mode.. its 'Full Sreeen' I found that i had to set the FSX .cfg of 'True Aspect Wide' from False to True or you feel like you're perched on the top of the control panel.. its way too close for comfort! You can set up the Bevel adjustments by right clicking to open the Matrox Power Desk from the Icon in your System Tray If you have already used it on another PC with a different Graphics card, it should just be a case of following those steps as laid out in the user guide on the disk. I had to play around with the display settings a bit but 3072x768 work. I also had to make sure that my NVidia settings were set up to reflect the Windoze setting, and that the FSX program was recognised by it. There will no doubt be some updates to the software for Win10 so you'll need to check the Matrox site for those, and any other software updates for Power Desk and SGU. As mine is working perfectly, i don't want to mess about with new versions.. if it ain't broke, dont waste time phaffing! Edited February 7, 2018 by hlminx 1 Link to post Share on other sites
Jess-b 420 Posted February 13, 2018 Report Share Posted February 13, 2018 Hi Johan, using three monitors is pretty easy these days. The 1060 GTA offers you plenty of options. You’ll need at least one DisplayPort adaptor if your monitors don’t support DisplayPort. To run three monitors, first plug all three in to gpu. next start up the pc and open the NVIDIA control panel. Look for the option to configure NVIDIA surround. Click on this and follow the instructions for set up. You can even sort bezel correction here. Once done, click apply and you’re done. Run your flight sim and select the new resolution. Hope this helps Jess B 1 Link to post Share on other sites
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now