Jump to content

Recommended Posts

HI,

I have downloaded the BA connect 145 from posky's website and have a really anoying problem. THe plane doesn't come with a VC so I downloaded the VC package, the plane works fine without the VC installed but as soon as I edit the Aircraft cfg to add the VC the plane doesn't display in the aircraft selection.

I know that the readme says for FS9 only but I downloaded a ERJ 135 that said that it was only for FS9 but that works no problem.

All that happens is that the plane dosen't show up after I edit the aircraft CFG to add the VC.

I have FSX with Vista.

Please help me.

TRB :biggrin:

Link to post
Share on other sites

Hi,

Here is the Cfg for the aircraft and below that one will be the CFG that the VC readme says I should replace the top part with.

Aircraft:

[fltsim.0]

title=Project Opensky - Embraer 145EU BA Connect G-EMBN

sim=OSERJ-145EU

model=

panel=

sound=

texture=Baw

kb_checklists=OS_ERJ_check

kb_reference=OS_ERJ_ref

atc_heavy=0

atc_airline=Speedbird

atc_id=G-EMBN

atc_flight_number=3905

atc_parking_types=GATE, RAMP, CARGO

atc_parking_code=

ui_manufacturer="Project Opensky"

ui_createdby="Project Opensky"

ui_typerole="Commercial Airliner"

ui_type=ERJ-145EU

ui_variation=BA Connect G-EMBN

visual_damage=1

description=Project Opensky nEmbraer Regional Jet - 145 EUnVersion 2007.9.3nnFSX and FS2004 CompatiblennEngine Type: Rolls-Royce AE3007AnnModel Designern Nick Wilkinson - Exteriorn Jacob Kubique - VCnnFlight Dynamics Designern Warren C. Danieln Brandon HenrynnTexture Designern Samy Fay (Masters)n Jacob Kubique and Corey Ford (VC)nnTest Pilotsn Project Opensky Members

[General]

atc_type=EMBRAER

atc_model=E145

performance=Passengers: 48nCrew: 2+1 nnTotal Cargo Volume: 325 cu ft nnDimensions:nSpan 65 ft 9 innLength 98 ft 0 innHeight 22 ft 2 innnEngines: RR AE3007AnTO Thrust Rating: 7,580 lbnnMax Fuel Cap.: 9,202 lbnMaxTOW: 44,291 lbnMZFW: 37,699 lbnnTypical Cruise Speed @ FL350: nM.78 - Normal CruisenM.80 - High Speed Cruise

editable=0

Category=airplane

[WEIGHT_AND_BALANCE]

//Maximum Ramp Weight 44,291 lb / 20,090 kg

//Maximum Landing Weight 41,226 lb / 18,700 kg

//Maximum Zero Fuel Weight 37,699 lb / 17,100 kg

//Basic Operating Weight 26,339 lb / 11,947 kg

//Maximum Payload 11,359 lb / 5,153 kg

//Maximum Fuel* 9,202 lb / 4,173 kg

//*Fuel Density 6.76 lb/gal / .803 kg/l

reference_datum_position= 0.000, 0.000, 0.000

empty_weight_CG_position= 0.000, 0.000, 0.000

max_number_of_stations= 8

// Maximum Payload per Embraer = 12,755 lbs

// Maximum Payload per Opensky = 9,651 lbs

// Seating Configuration - Option 4 - Max PAX = 48

station_load.0 = 75, 13.124, 0.000000, 3.000000, Wardrobe

station_load.1 = 320, 13.124, 0.000000, 3.000000, Galley1

station_load.2 = 160, 13.124, 0.000000, 3.000000, Galley2

station_load.3 = 2380, 13.124, 0.000000, 3.000000, Std Economy Fwd // 14 PAX

station_load.4 = 5440, 0.000, 0.000000, 3.000000, Std Economy Aft // 32 PAX

station_load.5 = 1276, -34.365, 0.000000, 3.000000, Aft Baggage

//Moments of Inertia

empty_weight_roll_MOI = 856479

empty_weight_pitch_MOI = 474924

empty_weight_yaw_MOI = 2368455

empty_weight_coupled_MOI= 0.000

max_gross_weight= 44291.000

empty_weight= 26707.000

CG_forward_limit= 0.000

CG_aft_limit= 0.000

[contact_points]

//0 Class (1 = Landing Gear, 2 = Scrape)

//1 Longitudinal Position (feet)

//2 Lateral Position (feet)

//3 Vertical Position (feet)

//4 Impact Damage Threshold (Feet Per Minute)

//5 Brake Map (0=None, 1=Left, 2=Right)

//6 Wheel Radius (feet)

//7 Steer Angle (degrees)

//8 Static Compression (feet) (0 if rigid)

//9 Max/Static Compression Ratio

//10 Damping Ratio (0=Undamped, 1=Critically Damped)

//11 Extension Time (seconds)

//12 Retraction Time (seconds)

//13 Sound Type

//14 Damage threshold 1 - Max speed

//15 Damage threshold 2 - Speed damage

// Landing Gear

// 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15

point.0 = 1, 39.531, 0.000, -7.900, 1300.000, 0, 0.812, 70.000, 0.550, 0.500, 0.250, 10.000, 14.000, 0.000, 250.000, 280.000 // Nose gear

point.1 = 1, -7.969, -6.705, -9.000, 1600.000, 1, 1.250, 0.000, 0.800, 1.500, 0.350, 13.000, 15.000, 2.000, 250.000, 280.000 // Left main gear

point.2 = 1, -7.969, 6.705, -9.000, 1600.000, 2, 1.250, 0.000, 0.800, 1.500, 0.350, 13.000, 15.000, 3.000, 250.000, 280.000 // Right main gear

// Scrape Points

// Fuselage

point.3 = 2, 39.531, 0.000, -2.000, 787.400, 0, 0.000, 0.000, 0.000, 0.000, 0.000, 0.000, 0.000, 4, 0.000, 0.000 // Nose

point.4 = 2, 31.500, 0.000, -3.800, 787.400, 0, 0.000, 0.000, 0.000, 0.000, 0.000, 0.000, 0.000, 4, 0.000, 0.000 // Fuselage bottom fwd

point.5 = 2, 0.000, 0.000, -6.250, 787.400, 0, 0.000, 0.000, 0.000, 0.000, 0.000, 0.000, 0.000, 4, 0.000, 0.000 // Fuselage bottom center

point.6 = 2, -15.000, 0.000, -3.800, 787.400, 0, 0.000, 0.000, 0.000, 0.000, 0.000, 0.000, 0.000, 4, 0.000, 0.000 // Fuselage bottom aft

point.7 = 2, 31.500, 0.000, 3.800, 787.400, 0, 0.000, 0.000, 0.000, 0.000, 0.000, 0.000, 0.000, 4, 0.000, 0.000 // Fuselage top fwd

point.8 = 2, 0.000, 0.000, 3.800, 787.400, 0, 0.000, 0.000, 0.000, 0.000, 0.000, 0.000, 0.000, 4, 0.000, 0.000 // Fuselage top center

point.9 = 2, -15.000, 0.000, 3.800, 787.400, 0, 0.000, 0.000, 0.000, 0.000, 0.000, 0.000, 0.000, 4, 0.000, 0.000 // Fuselage top aft

point.10= 2, 31.500, -3.800, 0.000, 787.400, 0, 0.000, 0.000, 0.000, 0.000, 0.000, 0.000, 0.000, 4, 0.000, 0.000 // Fuselage width fwd lt

point.11= 2, 0.000, 3.800, 0.000, 787.400, 0, 0.000, 0.000, 0.000, 0.000, 0.000, 0.000, 0.000, 4, 0.000, 0.000 // Fuselage width fwd rt

point.12= 2, -15.000, -3.800, 0.000, 787.400, 0, 0.000, 0.000, 0.000, 0.000, 0.000, 0.000, 0.000, 4, 0.000, 0.000 // Fuselage width center lt

point.13= 2, 0.000, 3.800, 0.000, 787.400, 0, 0.000, 0.000, 0.000, 0.000, 0.000, 0.000, 0.000, 4, 0.000, 0.000 // Fuselage width center rt

point.14= 2, -44.235, -3.800, 0.000, 787.400, 0, 0.000, 0.000, 0.000, 0.000, 0.000, 0.000, 0.000, 4, 0.000, 0.000 // Fuselage width aft left

point.15= 2, -44.235, 3.800, 0.000, 787.400, 0, 0.000, 0.000, 0.000, 0.000, 0.000, 0.000, 0.000, 4, 0.000, 0.000 // Fuselage width aft right

point.16= 2, -15.938, 0.000, 0.000, 787.400, 0, 0.000, 0.000, 0.000, 0.000, 0.000, 0.000, 0.000, 4, 0.000, 0.000 // Tailskid aft

point.17= 2, -52.269, 0.000, 3.000, 787.400, 0, 0.000, 0.000, 0.000, 0.000, 0.000, 0.000, 0.000, 4, 0.000, 0.000 // Tail-APU

// Tailplane, vert/horiz stabs

point.18= 2, -58.469, 0.000, 12.200, 787.400, 0, 0.000, 0.000, 0.000, 0.000, 0.000, 0.000, 0.000, 7, 0.000, 0.000 // Vertical stab fwd

point.19= 2, -50.669, 0.000, 12.000, 787.400, 0, 0.000, 0.000, 0.000, 0.000, 0.000, 0.000, 0.000, 7, 0.000, 0.000 // Vertical stab aft

point.20= 2, -58.000, -12.450, 11.000, 787.400, 0, 0.000, 0.000, 0.000, 0.000, 0.000, 0.000, 0.000, 5, 0.000, 0.000 // Horizontal Stab aft lt

point.21= 2, -58.000, 12.450, 11.000, 787.400, 0, 0.000, 0.000, 0.000, 0.000, 0.000, 0.000, 0.000, 6, 0.000, 0.000 // Horizontal Stab aft rt

// Wings

point.22= 2, -8.500, -32.950, -1.000, 787.400, 0, 0.000, 0.000, 0.000, 0.000, 0.000, 0.000, 0.000, 5, 0.000, 0.000 // Left wingtip fwd

point.23= 2, -11.000, -32.950, -1.000, 787.400, 0, 0.000, 0.000, 0.000, 0.000, 0.000, 0.000, 0.000, 5, 0.000, 0.000 // Left wingtip aft

point.24= 2, -8.500, 32.950, -1.000, 787.400, 0, 0.000, 0.000, 0.000, 0.000, 0.000, 0.000, 0.000, 6, 0.000, 0.000 // Right wingtip fwd

point.25= 2, -11.000, 32.950, -1.000, 787.400, 0, 0.000, 0.000, 0.000, 0.000, 0.000, 0.000, 0.000, 6, 0.000, 0.000 // Right wingtip aft

point.26= 2, 0.000, -13.500, -2.500, 787.400, 0, 0.000, 0.000, 0.000, 0.000, 0.000, 0.000, 0.000, 5, 0.000, 0.000 // Left wing-mid fwd

point.27= 2, -7.500, -13.500, -2.500, 787.400, 0, 0.000, 0.000, 0.000, 0.000, 0.000, 0.000, 0.000, 5, 0.000, 0.000 // Left wing-mid aft

point.28= 2, 0.000, 13.500, -2.500, 787.400, 0, 0.000, 0.000, 0.000, 0.000, 0.000, 0.000, 0.000, 6, 0.000, 0.000 // Right wing-mid fwd

point.29= 2, -7.500, 13.500, -2.500, 787.400, 0, 0.000, 0.000, 0.000, 0.000, 0.000, 0.000, 0.000, 6, 0.000, 0.000 // Right wing-mid aft

// Engines

point.30= 2, -20.000, -6.750, 3.900, 787.400, 0, 0.000, 0.000, 0.000, 0.000, 0.000, 0.000, 0.000, 8, 0.000, 0.000 // Left engine bottom

point.31= 2, -20.000, 6.750, 3.900, 787.400, 0, 0.000, 0.000, 0.000, 0.000, 0.000, 0.000, 0.000, 8, 0.000, 0.000 // Right engine bottom

point.32= 2, -14.000, -6.750, 0.000, 787.400, 0, 0.000, 0.000, 0.000, 0.000, 0.000, 0.000, 0.000, 8, 0.000, 0.000 // Left engine fwd

point.33= 2, -14.000, 6.750, 0.000, 787.400, 0, 0.000, 0.000, 0.000, 0.000, 0.000, 0.000, 0.000, 8, 0.000, 0.000 // Right engine fwd

max_number_of_points = 34

static_pitch = -1.260

static_cg_height = 7.500

gear_system_type=1 //Hydraulic

emergency_extension_type=2 //None=0,Pump=1,Gravity=2

[LIGHTS]

//Types: 1=beacon, 2=strobe, 3=navigation, 4=cockpit, 5=landing

light.1=1, 1.243, 0.000, 4.245, fx_beacon ,

light.2=1, -7.000, 0.000, -6.000, fx_beacon ,

[Views]

eyepoint = 31.4, -1.80, 2.0

[electrical]

max_battery_voltage = 12.0

generator_alternator_voltage = 13.8

max_generator_alternator_amps = 40.0

;BusType, MaxAmpLoad, MinVoltage BusTypes:0=MainBus,1=AvionicsBus,2=BatteryBus,3=HotBatteryBus,4-7=Generator/AlternatorBus(1-4)

avionics_bus = 0, 5 , 9.5

avionics = 1, 5 , 9.5

additional_system = 0, 2 , 9.5

marker_beacon = 1, 2 , 9.0

fuel_pump = 0, 5 , 9.0

[flight_tuning]

cruise_lift_scalar =0.750

parasite_drag_scalar =1.000

induced_drag_scalar =1.000

elevator_effectiveness =1.750

aileron_effectiveness =2.500

rudder_effectiveness =1.000

pitch_stability =4.000

roll_stability =1.000

yaw_stability =3.000

elevator_trim_effectiveness =1.000

aileron_trim_effectiveness =1.000

rudder_trim_effectiveness =1.000

[airplane_geometry]

wing_area = 551.000

//wing_span = 68.916 //EMB-145XR

wing_span = 65.900 //EMB-145EP/ER/EU/MP/MKL/LR/LU

wing_root_chord = 7.850

wing_dihedral = 3.000

wing_incidence = 6.000

wing_twist = 1.000

oswald_efficiency_factor = 1.000

//wing_winglets_flag = 1 //EMB-145XR

wing_winglets_flag = 0 //EMB-145EP/ER/EU/MP/MKL/LR/LU

wing_sweep = 24.760

wing_pos_apex_lon = 12.000

wing_pos_apex_vert = -2.500

htail_area = 120.600

htail_span = 24.900

htail_pos_lon = -48.844

htail_pos_vert = 12.848

htail_incidence = 5.000 //<===========

htail_sweep = 35.000

vtail_area = 77.500

vtail_span = 15.716

vtail_sweep = 42.000

vtail_pos_lon = -27.000

vtail_pos_vert = 4.000

elevator_area = 25.840

aileron_area = 25.000

rudder_area = 25.630

elevator_up_limit = 24.000

elevator_down_limit = 15.000

aileron_up_limit = 25.000

aileron_down_limit = 15.000

rudder_limit = 15.000

elevator_trim_limit = 15.000

spoiler_limit = 30.000

spoilerons_available = 0

aileron_to_spoileron_gain = 3.000

min_ailerons_for_spoilerons= 0.700

min_flaps_for_spoilerons = 0.000

auto_spoiler_available = 1

spoiler_extension_time = 2.000

positive_g_limit_flaps_up = 9.615

positive_g_limit_flaps_down= 2.991

negative_g_limit_flaps_up = -5.341

negative_g_limit_flaps_down= -2.000

[GeneralEngineData]

engine_type= 1

Engine.0= -20.000, -6.750, 2.800

Engine.1= -20.000, 6.750, 2.800

fuel_flow_scalar= 1.200

min_throttle_limit=-0.250000

[TurbineEngineData]

bypass_ratio=5.000 // Overall Pressure Ratio = 18-20:1

fuel_flow_gain= 0.003

inlet_area= 8.0786

rated_N2_rpm= 7376.000

static_thrust= 7580.000

afterburner_available= 0

reverser_available= 1.000

[jet_engine]

thrust_scalar =1.000

[Radios]

// Radio Type = availiable, standby frequency, has glide slope

Audio.1 = 1

Com.1 = 1, 1

Com.2 = 1, 1

Nav.1 = 1, 1, 1

Nav.2 = 1, 1, 0

Adf.1 = 1

Transponder.1 = 1

Marker.1 = 1

[electrical]

max_battery_voltage = 24.0

generator_alternator_voltage = 28.0

max_generator_alternator_amps = 400.0

[hydraulic_system]

normal_pressure = 3000.0 //PSI

electric_pumps = 0 //no electric pumps

engine_map = 1,1,0,0 //pumps on Eng1,2

[direction_indicators]

//1 Type: 0=None, 1=Vacuum Gyro, 2=Electric Gyro, 3=Electro-Mag Slaved Compass, 4=Slaved to another

//2 Indicator number of slaving indicator if Type = 4

direction_indicator.0=3,0

[attitude_indicators]

//Type: 0=None, 1=Vacuum Gyro, 2=Electric Gyro

attitude_indicator.0 = 2

attitude_indicator.1 = 2

[altimeters]

altimeter.0 = 1

altimeter.1 = 1

[turn_indicators]

//Type: 0=None, 1=Electric Gyro, 2= Vacuum Gyro

turn_indicator.0=0,0

[vacuum_system]

max_pressure=5.15 //PSI

vacuum_type=2 //Type: 0=None, 1=Engine pump (default), 2=Pneumatic, 3=Venturi

[pneumatic_system]

max_pressure=18.000000

bleed_air_scalar=1.000000

[pitot_static]

vertical_speed_time_constant = 1 //Increasing this value will cause a more instantaneous reaction in the VSI

pitot_heat = 1.0 //Scalar on heat effectiveness, 0 = not available

[keyboard_response]

//Breakpoint speeds (knots) on the keyboard increments of control surfaces.

//Speed at which the incremenet is reduced to 1/2 and 1/8 respectively.

elevator = 100, 200

aileron = 100, 200

rudder = 100, 200

[direction_indicators]

//1 Type: 0=None, 1=Vacuum Gyro, 2=Electric Gyro, 3=Electro-Mag Slaved Compass, 4=Slaved to another

//2 Indicator number of slaving indicator if Type = 4

direction_indicator.0=3,0

[deice_system]

structural_deice_type=1 //0 = None, 1 = Heated Leading Edge, 2 = Bleed Air Boots, 3 = Eng Pump Boots

[exits]

number_of_exits = 2

exit_rate.0 = 0.3 ;Percent per second

exit_rate.1 = 0.5 ;Percent per second

exit_rate.2 = 0.8 ;Percent per second

[EFFECTS]

wake=fx_wake

water=fx_spray

dirt=fx_tchdrt

touchdown=fx_tchdwn, 1

[Reference Speeds]

flaps_up_stall_speed = 112.000

full_flaps_stall_speed = 102.000

cruise_speed = 431.000

max_indicated_speed=340.000000

max_mach=0.82000

[autopilot]

autopilot_available= 1

flight_director_available= 1

default_vertical_speed= 0.000

autothrottle_available= 1

autothrottle_arming_required= 0

autothrottle_takeoff_ga= 1

autothrottle_max_rpm= 95.000

pitch_takeoff_ga= 8.000

use_no_default_pitch = 1 // 0 = Default to current pitch mode, 1 = No default pitch mode.

use_no_default_bank = 1 // 0 = Default to Wing Leveler mode, 1 = No default bank mode.

default_pitch_mode=0

default_bank_mode=0

max_pitch=10.000000

max_pitch_acceleration=1.000000

max_pitch_velocity_lo_alt=1.000000

max_pitch_velocity_hi_alt=0.030000

max_pitch_velocity_lo_alt_breakpoint=17000.000000

max_pitch_velocity_hi_alt_breakpoint=24000.000000

max_bank=30.000000

max_throttle_rate=0.100000

nav_proportional_control=25.000000

nav_integrator_control=0.250000

nav_derivative_control=0.000000

nav_integrator_boundary=2.500000

nav_derivative_boundary=0.000000

gs_proportional_control=9.520000

gs_integrator_control=0.260000

gs_derivative_control=0.000000

gs_integrator_boundary=0.700000

gs_derivative_boundary=0.000000

yaw_damper_gain=2.000000

max_bank_acceleration=0.800000

max_bank_velocity=3.000000

[forcefeedback]

gear_bump_nose_magnitude=3000 ; 0 - 10000

gear_bump_nose_direction=18000 ; 0 - 35999 degrees

gear_bump_nose_duration=250000 ; in microseconds

gear_bump_left_magnitude=2700 ; 0 - 10000

gear_bump_left_direction=35500 ; 0 - 35999 degrees

gear_bump_left_duration=250000 ; in microseconds

gear_bump_right_magnitude=2700 ; 0 - 10000

gear_bump_right_direction=00500 ; 0 - 35999 degrees

gear_bump_right_duration=250000 ; in microseconds

ground_bumps_magnitude1=1300 ; 0 - 10000

ground_bumps_angle1=08900 ; 0 - 35999 degrees

ground_bumps_intercept1=3.0

ground_bumps_slope1=0.20

ground_bumps_magnitude2=200 ; 0 - 10000

ground_bumps_angle2=09100 ; 0 - 35999 degrees

ground_bumps_intercept2=1.075

ground_bumps_slope2=0.035

crash_magnitude1=10000 ; 0 - 10000

crash_direction1=01000 ; 0 - 35999 degrees

crash_magnitude2=10000 ; 0 - 10000

crash_direction2=9000 ; 0 - 35999 degrees

crash_period2=75000 ; in microseconds

crash_duration2=2500000 ; in microseconds

[brakes]

toe_brakes_scale=0.600000

parking_brake=1

auto_brakes=0

hydraulic_system_scalar = 1 //On brakes dependant on the hydraulic system, ratio hyd system to max brake hyd pressure

[gear_warning_system]

gear_warning_available=0

pct_throttle_limit=0.099976

flap_limit_power=30.022988

flap_limit_idle=15.011494

[stall_warning]

type=1

stick_shaker=1

[attitude_indicators]

attitude_indicator.0=1

[turn_indicators]

turn_indicator.0=1,0

[TailHook] // For opening cargo door.

tailhook_length=1 ;(feet)

tailhook_position = 0.0, 0.0, 0.0 ;(feet) longitudinal, lateral, vertical positions from datum

[folding_wings] // For opening main deck cargo door.

wing_fold_system_type = 4 ;0=None

fold_rates = 0.05,0.05 ;Percent per second

cable_force_adjust = 1.0

[hydraulic_system]

normal_pressure = 3000.0 //PSI

electric_pumps = 0 //no electric pumps

engine_map = 1,1,0,0 //pumps on Eng1,2

[pitot_static]

pitot_heat=1.000000

[vacuum_system]

max_pressure=5.150000

vacuum_type=2

electric_backup_pressure=0.000000

engine_map=0,0,0,0

[pneumatic_system]

max_pressure=18.000000

bleed_air_scalar=1.000000

[deice_system]

structural_deice_type=0

[Flaps.0]

type= 1

span-outboard= 0.800

extending-time= 21.000

system_type= 0

damaging-speed= 220.000

blowout-speed= 280.000

lift_scalar= 1.000

drag_scalar= 1.000

pitch_scalar= 1.000

flaps-position.0= 0.000, 0.000

flaps-position.1= 9.000, 0.000

flaps-position.2= 18.000, 0.000

flaps-position.3= 22.000, 0.000

flaps-position.4= 45.000, 0.000

[Flaps.1]

type= 1

span-outboard= 0.400

extending-time= 15.000

system_type= 0

damaging-speed= 220.000

blowout-speed= 280.000

lift_scalar= 1.000

drag_scalar= 1.000

pitch_scalar= 1.000

flaps-position.0= 0.000, 0.000

flaps-position.1= 9.000, 0.000

flaps-position.2= 18.000, 0.000

flaps-position.3= 22.000, 0.000

flaps-position.4= 45.000, 0.000

[CameraDefinition.0]

Title = "Tail"

Guid = {5c1df273-034b-4e7f-953a-9d5e26f1646c}

Description = Looking forward from behind the aircraft

Origin = Center

SnapPbhAdjust = Swivel

SnapPbhReturn = FALSE

PanPbhAdjust = Swivel

PanPbhReturn = FALSE

Track = None

ShowAxis = FALSE

AllowZoom = TRUE

InitialZoom = .75

ShowWeather = Yes

InitialXyz = 0, 2.3, -20.0

InitialPbh = 10, 0, 0

XyzAdjust = TRUE

Category=Aircraft

MomentumEffect=TRUE

ClipMode=Minimum

[CameraDefinition.1]

Title = "Right Wing"

Guid = {C690EAFD-223A-42d0-99E0-681ADF93BB59}

Description = View from the right wing tip looking at the cockpit

Origin = Center

SnapPbhAdjust = Swivel

SnapPbhReturn = FALSE

PanPbhAdjust = Swivel

PanPbhReturn = FALSE

Track = None

ShowAxis = FALSE

AllowZoom = TRUE

InitialZoom = 0.45

ShowWeather = Yes

InitialXyz = 10.8, 1.4, -2.0

InitialPbh = 6, 0, 310

XyzAdjust = TRUE

Category=Aircraft

MomentumEffect = FALSE

ClipMode=Minimum

[CameraDefinition.2]

Title = "Left Wing"

Guid = {f25dfa2e-fd2e-4b89-81e2-0575cbcb60de}

Description = View from the left wing tip looking at the cockpit

Origin = Center

SnapPbhAdjust = Swivel

SnapPbhReturn = FALSE

PanPbhAdjust = Swivel

PanPbhReturn = FALSE

Track = None

ShowAxis = FALSE

AllowZoom = TRUE

InitialZoom = 0.45

ShowWeather = Yes

InitialXyz = -10.8, 1.4, -2.0

InitialPbh = 6, 0, 50

XyzAdjust = TRUE

Category=Aircraft

MomentumEffect = No

ClipMode=Minimum

[CameraDefinition.001]

Title = "Radio Stack"

Guid = {195EAB58-9E4A-2E2A-A34C-A8D9D948F078}

Origin = Virtual Cockpit

MomentumEffect = No

SnapPbhAdjust = None

SnapPbhReturn = False

PanPbhAdjust = None

PanPbhReturn = False

Track = None

ShowAxis = FALSE

AllowZoom = TRUE

InitialZoom = 1.5

SmoothZoomTime = 2.0

ZoomPanScalar = 1.0

ShowWeather = Yes

XyzAdjust = TRUE

ShowLensFlare=FALSE

Category = Cockpit

PitchPanRate=20

HeadingPanRate=60

InitialXyz=0.45, -0.25, -0.1

InitialPbh=14.2, 0, 0

[CameraDefinition.002]

Title = "Engine Controls"

Guid = {195EAB58-9E4A-3E2A-A34C-A8D9D948F078}

Origin = Virtual Cockpit

MomentumEffect = No

SnapPbhAdjust = None

SnapPbhReturn = False

PanPbhAdjust = None

PanPbhReturn = False

Track = None

ShowAxis = FALSE

AllowZoom = TRUE

InitialZoom = 1.1

SmoothZoomTime = 2.0

ZoomPanScalar = 1.0

ShowWeather = Yes

XyzAdjust = TRUE

ShowLensFlare=FALSE

Category = Cockpit

PitchPanRate=20

HeadingPanRate=60

InitialXyz=0.30, 0.09, -0.18

InitialPbh=48.5, 0, 9

[fuel]

LeftMain =-1.800000,-6.750000,-1.500000,680.000000,0.000000

RightMain =-1.800000, 6.750000,-1.500000,680.000000,0.000000

fuel_type =2.000000

number_of_tank_selectors=1

electric_pump=0

VC Readme that I should put in place:

[fltsim.**]

title=Project Opensky - Embraer-145XR Virtual Cockpit ***Enter Additonal desciption here***

sim=OSERJ145XR

model=vc

panel=vc

sound=

kb_checklists=

kb_reference=

atc_heavy=0

atc_airline=

atc_id=

atc_flight_number=

atc_parking_types=GATE, RAMP, CARGO

atc_parking_code=EMB

ui_manufacturer=Project Opensky

ui_createdby=Project Opensky

ui_typerole=Commercial Airliner

ui_type=ERJ-145XR VC *Insert Type Here*

ui_variation=

visual_damage=1

description=Project Opensky nEmbraer Regional Jet - 145XRnVersion 2007.9.2nnFSX and FS2004 Compatible

Link to post
Share on other sites

Hi TRB,

First of all, I will assume that this is one of the first times that you have attempted something like this, so I would think that the problem lies with how you are copy the text into the aircraft.cfg file.

FS needs to know what it is looking for, so you need to add the next number in sequence for the aircraft. So try adding this to the .cfg file and see what happens

[fltsim.1]

title=Project Opensky - Embraer-145XR Virtual Cockpit ***Enter Additonal desciption here***

sim=OSERJ145XR

model=vc

panel=vc

sound=

kb_checklists=

kb_reference=

atc_heavy=0

atc_airline=

atc_id=

atc_flight_number=

atc_parking_types=GATE, RAMP, CARGO

atc_parking_code=EMB

ui_manufacturer=Project Opensky

ui_createdby=Project Opensky

ui_typerole=Commercial Airliner

ui_type=ERJ-145XR VC *Insert Type Here*

ui_variation=

visual_damage=1

description=Project Opensky nEmbraer Regional Jet - 145XRnVersion 2007.9.2nnFSX and FS2004 Compatible

The part you are told to copy has [fltsim.**] as the developer will notknow how many other additional liveries you have installed, so you need to add this part in yourself to prevent any problems. If the last number in sequence is 4, add a 5 in there etc...

Hope that helps

Link to post
Share on other sites

Hi TRB,

Don't mean to butt in here. I have been adjusting and changing AC config.files for a while now. I noticed that the SIM is different in each of the AC config.files. Some of the problems I have run into I have found that this can cause the AC not to show. there is a "-" in the first original Sim and it's not in the second. The Sims should be the same in both.

This may not be the problem you mention but it's a start. I know it makes a big difference in adding repaints, and this would be sort of the same when it comes to changing or adding to the AC config. file.

Link to post
Share on other sites

Please sign in to comment

You will be able to leave a comment after signing in



Sign In Now
  • Recently Browsing   0 members

    No registered users viewing this page.

×
×
  • Create New...