REX Overdrive Released

[Aircraft Aviation 2]

Yup! It's out...

http://www.realenvironmentxtreme.com/overdrive.html

PLEASE ENSURE YOU HAVE VERSION REX.6011 BEFORE INSTALLING. IT IS VITAL

[mutley 4,487]

Yup! It's out... But a few glitches...

http://www.realenvironmentxtreme.com/overdrive.html

Downloaded it ok from here: http://realenvironmentxtreme.com/forum/index.php?topic=10463.0

Cheers

[Aircraft Aviation 2]

Yup Joe you are correct, te glitches I referred to were for the people that had mistakendly not installed the .6011 patch for REX2.

Comment removed :biggrin: .

BTW, off-topic question. Do you have the FSX Light Bloom turned on (default FSX checked)? Or do you just use ENB Bloom. If you just use ENB, please could you post your settings? (Just paste 'em in).

Reason being, Im trying to test everyone's ENB setups, and see which one I find best.

Jack :???:

[mutley 4,487]

I will post my ENB settings when I get back to my FS PC tomorrow aalthough I have not had time to fine tune them yet.

Generally I don't use ENB or Bloom unless I know I am taking screenshots.

[Aircraft Aviation 2]

I will post my ENB settings when I get back to my FS PC tomorrow aalthough I have not had time to fine tune them yet.

Generally I don't use ENB or Bloom unless I know I am taking screenshots.

Awesome. Thanks Joe :biggrin: .

And default bloom? Do you tick this box in the settings or leave it blank?

[Aircraft Aviation 2]

Boom! All downloaded! :biggrin:

I will begin install shortly, and will test tomorrow. Over the weekend, I really hope to get cracking on the F1 stuff, and start writing by Monday.

Jack :???:

[rob16584 42]

Downloading now

[mutley 4,487]

Sorry Jack I forgot to respond

enbseries.ini

[PROXY]
EnableProxyLibrary=0
InitProxyFunctions=0
ProxyLibrary=
[GLOBAL]
UseEffect=1
AlternativeDepth=1
AllowAntialias=1
BugFixMode=0
SkipShaderOptimization=0
QuadVertexBuffer=0
EnableShaders_3_0=1
UseMRTRendering=0
AdditionalConfigFile=enbseries2.ini
[EFFECT]
EnableBloom=1
EnableOcclusion=0
EnableReflection=0
EnableMotionBlur=0
EnableWater=0
EnableShadow=0
DepthBias=0
EnableDepthOfField=0
[INPUT]
KeyUseEffect=123
KeyBloom=120
KeyOcclusion=121
KeyReflection=122
KeyCombination=16
KeyScreenshot=44
KeyShadow=119
KeyWater=118
KeyShowFPS=106
[REFLECTION]
ReflectionPower=100
ChromePower=100
UseCurrentFrameReflection=1
ReflectionQuality=1
ReflectionSourceSpecular=50
ReflectionSourceTFactor=50
UseAdditiveReflection=1
ReflectionDepthBias=0
UseLowResReflection=1
ReflectionSinglePass=1
UseEnvBump=0
EnvBumpAmount=100
EnvBumpOffset=100
ReflectionFlip=0
[BLOOM]
BloomPowerDay=0
BloomFadeTime=400
BloomConstantDay=1
BloomQuality=0
BloomScreenLevelDay=95
BloomCurveDay=0
BloomPowerNight=18
BloomConstantNight=0
BloomCurveNight=0
BloomScreenLevelNight=20
BloomAdaptationScreenLevel=24
BloomAdaptationMultiplier=100
BloomAllowOversaturation=1
BloomMaxLimit=100
[SSAO]
UseFilter=1
OcclusionQuality=2
FilterQuality=1
DarkeningLevel=30
BrighteningLevel=30
IlluminationLevel=30
AdditiveIlluminationLevel=30
UseAmbientOcclusion=1
UseIndirectLighting=1
FadeDistance=50
UseForAlphaTest=0
UseForAlphaBlend=0


[COLORCORRECTION]
DarkeningAmountDay=40
ScreenLevelDay=70
ScreenLevelNight=1
DarkeningAmountNight=-30
GammaCurveDay=0
GammaCurveNight=-2
ColorSaturationDay=0
ColorSaturationNight=0
UsePaletteTexture=0
[WATER]
UseWaterDeep=0
WaterDeepness=20
WaterQuality=0
[SHADOW]
ShadowFadeStart=40
ShadowFadeEnd=80
ShadowAmountDay=100
ShadowAmountNight=30
ShadowScreenLevelDay=60
ShadowScreenLevelNight=20
ShadowQuality=1
UseShadowFilter=0
FilterQuality=2
ShadowBlurRange=30
[ENGINE]
ForceAnisotropicFiltering=0
MaxAnisotropy=8
ForceDisplayRefreshRate=0
DisplayRefreshRateHz=60
[MOTIONBLUR]
MotionBlurQuality=1
MotionBlurVelocity=0
MotionBlurRotation=0
[PERPIXELLIGHTING]
SpecularColorMin=0
SpecularColorMax=100
SpecularColorMultiplier=100
SpecularGlossinessMin=0
SpecularGlossinessMax=100
SpecularGlossinessMultiplier=100
[DEPTHOFFIELD]
DOFQuality=2
DOFNumberOfPasses=1
DOFFocusRange=50
DOFBlurinessRange=10

As I mentioned earlier, this set up is untouched from the original file I downloaded.

I do not generally fly with default bloom switch on as sometimes it make the sun look unrealistic.

Cheers

Joe

[rob16584 42]

I've downloaded the installer 5 times now and each time when I try to install it I get this message:

Anyone got any ideas?

thanks

[mutley 4,487]

Hi Rob

Is this when the installer says it is extracting the files or when you start the installation at the next step?

Possible? http://realenvironmentxtreme.com/forum/index.php?topic=10591.0

Double check you are browsing to the correct REX folder? (mine is on another drive)

[Aircraft Aviation 2]

Hi Rob,

I had the same error. You must select the EXACT folder REX is currently installed to.

[rob16584 42]

Thanks guys, that solved it!

I was just accepting what it said as the folder location

[Aircraft Aviation 2]

Thanks guys, that solved it!

I was just accepting what it said as the folder location

Precisely what I did first time!!!