computer2cockpit 0 Posted February 7, 2014 Report Share Posted February 7, 2014 Hi, everyone. We are a small team of enthusiasts working on development of flight simulation hardware. The core of our system is Flight Simulation Interface designed to connect entire Twin Engine Aircraft Cockpit. The hardware that we are developing is connected via this interface to a computer. We are currently prototyping hardware for Twin Engine Piston Cockpit. We have future plans for Twin Turboprop and Twin Jet controls and panels compatible with existing interface. We are posting on forums to reach out to the community and tell what we are working on. We are hoping to get some opinions and feedback. We are NOT selling anything. If there are cockpit builders active on this forum, and we are hoping that our interface might be interesting to them also. It i designed to connect entire cockpit. Not just a section or a number of controls, switches and encoders, but the whole cockpit. For more details about the project visit our web site or FAQ section. And if you have any questions/suggestions feel free to start the discussion or contact us via e-mail: contact@computer2cockpit.com You can also support us by voting the poll on our web. We will keep this community informed about the project news and progress via this post. Thank you for support! Miroslav Šegvić Head of Project Link to post Share on other sites
ddavid 149 Posted February 8, 2014 Report Share Posted February 8, 2014 Hi Miroslav and thank you for posting about your new products for home cockpits. I'm sure you will have plenty of interest, especially as your products seem very keenly priced. Good Luck! Cheers - Dai. Link to post Share on other sites
computer2cockpit 0 Posted February 8, 2014 Author Report Share Posted February 8, 2014 Thank you ddavid. We are working hard on keeping that price down, even for initial series that we plan to crowdfund in fall 2014. We understand that flight simmers are used to products with multifunctional buttons, and we are trying to promote something different here to accommodate for pilot flight preparation, the full functionality. We get a lot of questions why this concept, but a lot of approval as well. So in effort to offer something completely new on the market, we are here to talk about it. Regards Link to post Share on other sites
brett 2,315 Posted February 10, 2014 Report Share Posted February 10, 2014 Nice looking setup. Build it and they will come. Like the price for the whole setup too! Good luck with your vision. Link to post Share on other sites
computer2cockpit 0 Posted February 27, 2014 Author Report Share Posted February 27, 2014 Hi, everyone. A little project update too keep you up to date. Flight Simulation interface firmware development is now complete. Few pictures from testing can be found on bottom of this page : http://www.computer2cockpit.com/?page_id=108 Back to work. Regards, Link to post Share on other sites
computer2cockpit 0 Posted July 2, 2014 Author Report Share Posted July 2, 2014 Hi Guys, We've published our Newsletter with design changes and additional products described. http://eepurl.com/U6u6L More details on the web. Tell us what you think! Link to post Share on other sites
J G 927 Posted July 2, 2014 Report Share Posted July 2, 2014 I have been watching this topic with interest. The products that are proposed look promising, but I was wondering if anything has actually been made yet. The images above look as though they could have been computer generated. - it would be good to see at least the products being used. Mutley's Hanger provides quality reviews for all FS software and hardware, and I am sure Mutley would welcome the opportunity to review one or two of these devices. Link to post Share on other sites
computer2cockpit 0 Posted July 2, 2014 Author Report Share Posted July 2, 2014 Thanks for the interest, As stated in FAQ section http://www.computer2cockpit.com/?page_id=771 These are computer generated images of latest designs that will go to production before the end of the year. We are currently prototyping the panels and they will be displayed in our offices for public testing at least two months before we offer them. As no investors are involved and this is a micro series product, we plan to offer the first series via crowdfunding and use that money to finance production. There will be many videos of hours and hours of public testing posted before that in following months. In order to sell the first series when the time comes, we are starting the public presentation very early in product development phase. So no actual products yet. Currently prototyping. Public testing next.. Will post all the updates. Link to post Share on other sites
computer2cockpit 0 Posted July 12, 2014 Author Report Share Posted July 12, 2014 Full list of simulated functions now available here:http://www.computer2cockpit.com/?page_id=222Support us by answering the poll here:http://www.computer2cockpit.com/?page_id=239Thanks Link to post Share on other sites
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now