goosenka 9 Posted August 12, 2014 Report Share Posted August 12, 2014 I have read and tried I must add, the fix to stop the Dash 8 from hopping about like a kanga either on stand and whilst taxiing. I have played around with the contact points figures - still doing it, checked FSUIPC for auto save - still doing it. Also whilst on topic, today i attempted a flight from EGLC. Route set fine, took off, turned right to follow SID and noticed the magenta route line disappeared on the SID and only the next waypoint was visible. Normal or am I doing something wrong? Drawing on your vast experience people so many thanks. Goose Edit - another quesso....i have also noticed that ezdok has no real bumpy movement when taking off like the a2a on grass if you know what i mean. Steady as a rock and, yes, ezdok is configured correctly as with my other aircraft. Thanking you kindly. Link to post Share on other sites
hifly 925 Posted August 12, 2014 Report Share Posted August 12, 2014 Hi Christian, this might be a silly question but have you installed all the updates? Mine bounced around before I got updates.. Sorry can't help on the other questions. Link to post Share on other sites
goosenka 9 Posted August 12, 2014 Author Report Share Posted August 12, 2014 Howdy....well the download from flightsim1 stated that it contained the latest patch. Played with a few more contact points and noticed that the horrendous bouncing stopped when on stand but only happened badly when going from taxiway to runway. Like a bucking bronko! Link to post Share on other sites
goosenka 9 Posted August 12, 2014 Author Report Share Posted August 12, 2014 Ok, so patch is the correct one. Also just flying again from eglc to eham. Get to REDFA and boom. Route disappears and plane starts circling. Flight plan still in FMS. If I use DTO to next waypoint bingo, its back on track. Most annoying. Link to post Share on other sites
brett 2,315 Posted August 13, 2014 Report Share Posted August 13, 2014 Sounds like the Dash is capturing a hold point, make sure you don't engage that part of the flightplan until is required. You can fill out all the information for it but not agree to it. Ez-Doc does not get along well with some A2A products(Accu-Sim installed) but if you check their site a fix has been posted. Link to post Share on other sites
goosenka 9 Posted August 13, 2014 Author Report Share Posted August 13, 2014 Thanks for replying. Well, it certainly doesn't look like a hold point. I will persevere and try some alternate routes and evaluate. I have disbaled the dynamic view option in ezdok as from reading it doesn't seem to work. Link to post Share on other sites
goosenka 9 Posted August 13, 2014 Author Report Share Posted August 13, 2014 Well i did another flight egkk to egjj. I guess it is doing what it should be doing as far as following the route. It does clear the current magenta route about 2 miles before the next waypoint but does follow the Lnav route to the next. Maybe i am too ngxd out over the years to forget what i know and start again! Link to post Share on other sites
brett 2,315 Posted August 14, 2014 Report Share Posted August 14, 2014 Have fun, always a good time learning a new aircraft. Link to post Share on other sites
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now