simi_av8r 0 Posted February 6, 2009 Report Share Posted February 6, 2009 .....get a Messerschmitt BF-110 for FS9? I've checked the likes of AlphaSim, Real Air, Flight Replicas and (or so it seems) not one of the major developers have made one. I've tried a few of the freeware ones, but no luck there either. I used to have the Ground Crew Designs CFS3 version converted for FS9, but that was before my system went *its up and now the developers have ceased and faded away... anyone got a clue or can point me in the right direction?? Link to post Share on other sites
hurricanemk1c 195 Posted February 7, 2009 Report Share Posted February 7, 2009 I'd look on AVSIM. I'll have a look now! Link to post Share on other sites
mutley 4,498 Posted February 7, 2009 Report Share Posted February 7, 2009 Simi, Apparently the CFS2 version works fine in FS9 http://www.regshanger.com/Groundcrew/ho ... %20FS9.php I haven't tried them they are just the result of my bloodhound instinct so sorry if they are no good, love the aircraft though! Cheers Link to post Share on other sites
simi_av8r 0 Posted February 7, 2009 Author Report Share Posted February 7, 2009 mut, they seem to be the ones i had before. my google searches went unanswered looking for 'Ground Crew Designs' and their own website (groudcrewdesigns.com) is non-responsive, so i'd thought they'd gone under - it seems not however. So thanks kindly for the links. I'll go get these and continue to build my WW2 Luftwaffe Hangar....next up the Feisler Storch, Focke Wulf TA152, and Junkers JU88.... Link to post Share on other sites
mutley 4,498 Posted February 7, 2009 Report Share Posted February 7, 2009 Glad I could help in some way. It looks like an interesting selection Simi, I hope we will get to see them :great: Cheers Link to post Share on other sites
allardjd 1,853 Posted February 7, 2009 Report Share Posted February 7, 2009 Simi, I got decent freeware versions of JU-88, Bf-109, JU-52 and JU-87 from somewhere. I still have the files. If you want to see them, they're in the Casablanca leg of the original ATWC. I put them in as AI to stage the Axis airbase shots. As I recall, the cockpits I looked at were dog manure, but the exteriors were pretty decent, especially the Ju-88 and Ju-52. Since I was only using them as AI they worked fine. Don't know how they'd work out as user-flown. If you're interested, PM me and I'll send you the files or we can try to figure out where I downloaded them from. John Link to post Share on other sites
Longbeard 0 Posted February 7, 2009 Report Share Posted February 7, 2009 I read somewhere that those birds had an "inverted" V engine. I have searched some for info about that, but came up short. I was a little curious about how an "inverted" V engine worked, was designed, etc. I need to get back on that search sometime. Link to post Share on other sites
hurricanemk1c 195 Posted February 8, 2009 Report Share Posted February 8, 2009 I think an inverted V engine would work by the pressure of ? pushing onto the cyclinders, pushing them up Not sure - I only know about a Napier D18-25 engines! Link to post Share on other sites
Longbeard 0 Posted February 8, 2009 Report Share Posted February 8, 2009 Probably so... It just seems like if you inverted it, it would complicate things like getting the fuel mixture where it needed to be for proper combustion, and not to mention cooling and oiling the crackshaft. But I've only seen pictures of them, I have no idea about the internals. Obviously they work, who am I to question it. :smile: Link to post Share on other sites
allardjd 1,853 Posted February 8, 2009 Report Share Posted February 8, 2009 They're not much different from any dry-sump engine. Radials and many motorcycle engines are like that too. The oil runs to a small collection sump at a suitable low-point where a scavenging pump moves it to a tank. In engines that are certified for inverted flight, there may be a scavenging pump suction at both the top and bottom of the crankcase and certain other arrangements to make sure things are lubricated while flying with the shiny side down. The main lube oil pump(s) takes a suction from the main oil tank and distribute the oil through a cooler, then through oil galleries, channels and tubes under pressure to where it's needed. Splash lubrication isn't depened upon much in aviation engines because they have to run in pretty much any attitude or orientations and also are subject to g forces in flight. All that would disrupt a wet-sump/splash system - the law of gravity hasn't so much been repealed as just suspended at times. Pressure lube and sprays to critical areas provide a more positive way of lubricating/cooling what needs it. Oil that is pooled on the top of the pistons is thrown off as soon as the engine is started, but hydraulic locking from oil that runs past the rings into a cylinder (bottom few in a radial, all in an inverted vee-type) is a real possibility and that's why you sometimes see pictures of people "pulling through" engines before attempting to start them. That operation has less to do with pre-lubrication than it does with making sure that there isn't a cylinder full of oil. John Link to post Share on other sites
Longbeard 0 Posted February 8, 2009 Report Share Posted February 8, 2009 Very informative John, thank you Sir! :smile: Link to post Share on other sites
Goober 0 Posted February 18, 2009 Report Share Posted February 18, 2009 Link to post Share on other sites
allardjd 1,853 Posted February 18, 2009 Report Share Posted February 18, 2009 Goober, Great link. That's a good article with good graphics. I'm still trying to figure out the roller bearings at the big end of the rods. Other than that it all seems to make sense. John Link to post Share on other sites
Goober 0 Posted February 19, 2009 Report Share Posted February 19, 2009 I'm struggling in my attempt to find you an exploded view of the bearing assembly. My mind's eye won't grasp it just as you. Chewy may pull through with some insight, he....well.........when needs be ,he has the aptitude and experiance with such things. Link to post Share on other sites
Longbeard 0 Posted February 19, 2009 Report Share Posted February 19, 2009 I didn't actually snap to that until you pointed it out, I was still struggling to figure out why the left bank compression ratio was different fromn the right bank. A roller bearing on a one-piece crankshaft puzzles me. From those pics you really can't determine the answer, but I would have to assume that the inner and outer races were two piece units. Anyone who has ever replaced U-joints on their car, and had the needles drop out, or fall to the end of the cap, would appreciate the difficulty involved in putting something like that together. Beats me, leave it to the Germans to figure that one out? Link to post Share on other sites
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now