aeromax 10 Posted January 29, 2021 Report Share Posted January 29, 2021 Does anyone have experience in these electronics, secure stable StepUp Converter, to use for pimp 5V up to 12V. There are a lot of Material around on Market, but it seems that they don’t work at all. It’s needed for Flags in Gauges. ....don’t have an itch for firebrigade.. Link to post Share on other sites
mutley 4,498 Posted January 29, 2021 Report Share Posted January 29, 2021 Not my thing Max but hopefully someone may have advice or a link 1 Link to post Share on other sites
aeromax 10 Posted January 29, 2021 Author Report Share Posted January 29, 2021 Maybe somebody is familiar (experience/ using/ used) with that kind of electronic, ... because mostly coming from china and a lot of them would say more than a half are junk, INOP or dangerous... Link to post Share on other sites
aeromax 10 Posted February 5, 2021 Author Report Share Posted February 5, 2021 Found and fixed one metal-oxide-semiconductor field-effect transistor MOSFET powered up to 12V. It’s quit enough for use with another Board to trigger the PWM Signal incl. using necessary Software. Flags are working now. 2 Link to post Share on other sites
J G 927 Posted February 22, 2021 Report Share Posted February 22, 2021 I use a real Tornado bomber landingear leaver and indicator gauge on my sim. They need a 20 v supply to power the lights in the gauge and the solenoid in the gear leaver. My solution was to use a 19v printer power supply, a bank of relays and an arduino card. The relays are quite noisy as they are physical switches, the mofset solution will be much less clunky! Link to post Share on other sites
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now