Jump to content

Flight Simulation and Optimizing Night Time Flights


Flight Simulation and Optimizing Night Time Flights  

3 members have voted

  1. 1. was this article helpful?

    • Yes
    • No
      0
    • i already know
      0


Recommended Posts

Flight simulation and Optimizing night time flights

Generally speaking out of the box fresh sim install is mainly geared towards day time flights; With very little regards to night flying,

Setting up for a proper day time flight requires allot of attention to detail; from setting up controls, weather conditions, scenery complexity,  vehicle, and visual add-on’s

This process could take one few  months to get comfortable with his environment settings and gear, it’s a tedious task many of us take to extreme (to say the least!),

 

your day time flight environment is balanced perfectly for the day; at the same time is also consuming the same  resources at night; not leaving much room for night time add-on’s,

 

There is a misconception that when night falls its dark anyway; what’s there to see? Optimize…?  What’s there to tweak different then day time when you barely see anything?

The last statement is the general concept most have when it comes to night flights; bear in mind that up to not long ago, night flying didn’t really exists to the extent it’s been developed in the past several years,

the original developer never envisioned such transformation that it never was an area of much interest; but recent developments allow us now to fully have VFR night flights; while looking out the window at real world vector data,

before we continue deeper into this article; remember the first few sentences I started with; the sim's night environment deserves now as much attention as day time does to fully enjoy todays night add-on’s,

 

 

many day time element are not visible at night, to redirect resources; some settings can be adjusted towards an optimized environment for night flights,

if we start by going through the settings in FSX/SE/P3D configuration tabs;

 

let’s have a look at Weather Tab,

consider that a normal human eyes can perceive natural  lights in the real world (depending on conditions and alt) 60-100 miles away in optimal conditions,

adding clouds at night beyond the minimum slider potion is pointless at night; as well as drawing high detail clouds; and every other related daytime eye candy,

 

moving to the Scenery tab,

Mesh complexity and Mesh Resolution both can be significantly reduced,

you will not see the added vertices drawn at night or a fine mountain contours and subtleties,

A mesh complexity of 30 with mesh resolution of 76-38 should be more than sufficient for night flight,

 

Texture resolution… at night? Do I need to extend on this one? Same goes for Water Effect,

These are not visible at night; there is no need to extend resourced for these features at night,

 

Scenery Complexity and Autogen Density shouldn’t exceed Normal for night fight,

 

In Aircraft Tab,

Shadows aren’t really visible at night; it is recommended to turn shadows off, but to each his own,

 

In Graphics Tab

I personally like the visuals at night with antialiasing switched off

 

These are just few very basic guidelines for optimizing your night time flights

The goal behind this is to free resources that aren’t used during night; you can dig more and find many creative way to conserve resources at night,

Many third party add-ons can also have their day time settings optimized for night; using the same logic,

 

 

Believe it or not, your unused aircraft adds up to the global VAS usage regardless of day or night,

I keep my unused aircraft in a folder I make called “hangar” with the same structure that’s inside  SIM\SimObjects\ ;

I keep this folder under SimObjects folder, this where 99% of my aircrafts are in (including default),

 

If you only fly in a predefined area like US, or UK etc…

There is no need to load the whole world every time you go for a local flights!

 

The last two advisories will decrease sim's load time significantly; as well as reduce your initial VAS consumption in general!

 

 

Before we go into more technical detail; no one is expecting you to manually go through each and every one of these setting each time you go for a flight,

Yet… It is unreasonable to assume that with today’s add-on’s our sim’s  should work regardless what we install in it;

we have HD textures, as well as HD Photoreal, and HD mesh and so much more than what initially thought of,

 

one must remember that we are still bound to 3.6GB usable VAS memory space allowed by x86 (32bit) application platform;

the name of the game here is balance; you have to balance your memory consumption to accommodate everything you want in your current flight,

 

This is the time to mention SimStarter By Developer - Peter Rosendhal. http://aviation.pero-online.de/

i highly recommend using SimStarter to create various startup profiles; to speed up your fsx load times; and general performance tweaks;

you can create many profiles that launch you right into your preconfigured flight without wasting time;

 

you can customize all the above settings and much more from a single GUI interface;

you will have complete control over all of Sim’s elements; , scenery.cfg, fsx/se/p3d.cfg as well as many third party add-on’s settings,

 

save your setting to a profile on your desktop, and with one click; SimStarter will put you on the runway with all the preconfigured environmental settings you selected for that profile,

SimStarter is a free and can be found here – http://aviation.pero-online.de/wordpress/?page_id=105 ; there are many tutorials on how to configure SimStarter to hook into third party add-on’s;

please don’t forget donate to help Peter continue his development on this magnificent irreplaceable tool!

Note that these guidelines should be used for day time flight as well as night time flight to maximize your Sim potential  and VAS pool,

 

how to make out what these xxxx.Base folders in scenery editor correspond to?

When selecting which scenery to keep active from the default scenery list; a common question that will come up is…

how do I know which areas to deactivate from the default scenery list, they are named Base.xxx with no distinction?

Here how…

the world is divided into a grid, and the scenery for each grid rectangle is stored in a separate folder, named rrcc Base,

where rr is the row in the grid (from 0 to 7), and cc the column (from 0 to 11).

 

first image showing FSX scenery grid, the second showing corresponding folders in Sim\Scenery

 

IC35076.jpgfsxscenery.jpg

Few Sim corks to be aware of

Starting a daytime flight then switching to nighttime through sim controls will cost you precious RAM space,

In the first image below, a random flight was loaded with daytime Simstarter profile,

The following image shows the same flight same position; switched to night time from within sim controls;

Yes I know the image is dark; the point is to show RAM usage between the first two, and the third one

In the Third image we start a preconfigured nighttime flight through a customized Simstarter profile

Note: the last two images have the exact same settings; they were simply loaded in a different way!

daytime.jpgswitchinginsim.jpgnighttime.jpg

if there’s something I neglected to mentioned please feel free to discuss;

Looking forward to hear some feedback from you guys,

 

Happy Flying

  • Like 2
Link to post
Share on other sites

Hi Chris,

I found this very useful and informative, I think SimStarter is becoming more relevant and useful when wanting to fly in totally different situations.

Joe

PS I have received your PM and I will reply after I get back from my vacation in the sunshine state!

  • Like 1
Link to post
Share on other sites

Good comments - I very rarely fly of a night but thinking about it I probably would never have re-tweaked my settings for night flights. But now you mention it, it does make sense so very useful article.

  • Like 1
Link to post
Share on other sites

Please sign in to comment

You will be able to leave a comment after signing in



Sign In Now
  • Recently Browsing   0 members

    No registered users viewing this page.

×
×
  • Create New...