J G 927 Posted October 3, 2018 Report Share Posted October 3, 2018 (edited) I have a problem with EGOV - RAF Valley in P3D v4.3. Some of my taxiways are not showing up Here is the scenery file in ADE: All the taxiways are in place, in fact it is nice and detailed. Below is how it appears in the sim: As you can see there are big bits missing. A closer look below shows that it is just the runway textures and not the details that are missing. I use ORBX wales and vectors but no addon EGOV scenery. Can anyone help with this problem? I think it also happens with other default scenery. I have tried running the ORBX vector tool but no change. Edited October 3, 2018 by J G Link to post Share on other sites
wain 879 Posted October 3, 2018 Report Share Posted October 3, 2018 I have noticed this, I assume it's an ORBX issue but I can't remember if the were there before ORBX was installed because that was ages ago.... Link to post Share on other sites
Quickmarch 488 Posted October 4, 2018 Report Share Posted October 4, 2018 I've had this issue. Unfortunately, I cannot recall the fix. Of all the things I've lost I miss my memory the most. It has to do with the airport overlay being (basically) flat and the underlying (default) terrain hilly. Link to post Share on other sites
dogtrack 346 Posted October 4, 2018 Report Share Posted October 4, 2018 Not sure if this will help John but as you have run the Vector tool, try this. Just in case the airport is misbehaving:- See if the offending airport's elevation .bgl is listed in the Scenery\World\Scenery folder. If it is, add ".off" to the file name. Has to be worth a try. Link to post Share on other sites
lionwing 71 Posted October 4, 2018 Report Share Posted October 4, 2018 It might not necessarily be a ORBX issue. This can occur in P3Dv4 if the original scenery uses "old" FS9 code. It is fixable but only by creating your own .bgl using methods agreeable to P3Dv4. If you have a copy of FSX try the scenery in that. Very likely it will work just fine. Link to post Share on other sites
J G 927 Posted October 5, 2018 Author Report Share Posted October 5, 2018 Thanks for the replies folks. EGOV is not listed in the Scenery\World\Scenery folder so that's a non starter, and I no longer have FSX so that fix is a no for me. The only thing that strikes me is that it looks like there might be some scenery in the stack that is in the wrong order. To me it looks like there is a simple 'airport over the top of a more detailed one. it looks like the runways have a surrounding texture that are on top of the rest of the scenery. Does this jog any memories? Link to post Share on other sites
dogtrack 346 Posted October 7, 2018 Report Share Posted October 7, 2018 At the risk of stating the obvious...just a thought...have you tried re-running the latest ORBX Library ? Link to post Share on other sites
dogtrack 346 Posted October 7, 2018 Report Share Posted October 7, 2018 PS. Also perhaps retry the "Migration". Link to post Share on other sites
J G 927 Posted October 7, 2018 Author Report Share Posted October 7, 2018 Thanks guys. If you can't solve the problem them find a way around it. At the Cosford show l was chatting to the guys at vRAF who showed me their freeware Raf Valley for P3D v4.x. Installing it proved a solution to my issue and has given me a far better Raf Valley. Job done! Link to post Share on other sites
dogtrack 346 Posted October 8, 2018 Report Share Posted October 8, 2018 Nice one !! Link to post Share on other sites
J G 927 Posted October 8, 2018 Author Report Share Posted October 8, 2018 (edited) Some screen shots of my new EGOV Valley. This is MSPG's freeware EGOV and Military AI's P3D v4..x Matrix AI installer. With Matrix AI: Note that the AI aircraft are all different as shown by the tail munbers AI traffic at EGOV. The first aircraft is performing a go around, the second a landing and the third a touch and go. Highly recommended. They have Lossiemouth and Brize Norton in the pipeline as well. Edited October 8, 2018 by J G Link to post Share on other sites
mutley 4,498 Posted October 8, 2018 Report Share Posted October 8, 2018 Nice work J G, , sorry to have missed you at the show. Link to post Share on other sites
J G 927 Posted October 9, 2018 Author Report Share Posted October 9, 2018 I didn't see anyone at the show I knew except Jess who was too busy to interrupt. I guess you all saw me first! 1 Link to post Share on other sites
wain 879 Posted October 9, 2018 Report Share Posted October 9, 2018 3 hours ago, J G said: I didn't see anyone at the show I knew except Jess who was too busy to interrupt. I guess you all saw me first! I saw Joe but he was talking and like you said Jess was busy... Looks a good rendition og EGOV... Link to post Share on other sites
hlminx 301 Posted October 21, 2018 Report Share Posted October 21, 2018 On 09/10/2018 at 12:08, J G said: I didn't see anyone at the show I knew except Jess who was too busy to interrupt. I guess you all saw me first! You mist have missed me too.. I was there with Joe and Needles. Funnily enough I did see someone from afar that I thought might be you.. with a younger chap, but they showed no spark of recognition so I guess it wasn't you.. Next year perhaps Link to post Share on other sites
J G 927 Posted October 21, 2018 Author Report Share Posted October 21, 2018 I was there with my son, but probably with my mind elsewhere, sorry I didn't see you! Link to post Share on other sites
hlminx 301 Posted October 25, 2018 Report Share Posted October 25, 2018 On 21/10/2018 at 23:33, J G said: I was there with my son, but probably with my mind elsewhere, sorry I didn't see you! Ahhh, it WAS you then.. Sorry to have missed you and your son. Eat a few more carrots next time before the show Link to post Share on other sites
J G 927 Posted October 26, 2018 Author Report Share Posted October 26, 2018 I will Steph, and next time I will remember to take my brain with me. Link to post Share on other sites
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now