Thomas Farr 2 Posted July 16, 2015 Report Share Posted July 16, 2015 Hi guys i was wondering if anyone had very blurry scenery when using orbx airport scenery such as YMML. I have very blurry ground textures and have no idea how to solve it any help much appreciated. Regards Tom Link to post Share on other sites
allardjd 1,853 Posted July 17, 2015 Report Share Posted July 17, 2015 Hi, Tom, I don't use Orbx so can't help much but I'm sure some helpful folks will be along soon.... John Link to post Share on other sites
mutley 4,498 Posted July 17, 2015 Report Share Posted July 17, 2015 Hi Tom, Just some quick questions. Have you always had this problem or has it only just started happening? Is it specifically Orbx airports or does it happen with others as well? Does the scenery get sharper if you pause the sim and wait a few seconds? Can you post a screenshot? Cheers, Joe Link to post Share on other sites
Thomas Farr 2 Posted July 17, 2015 Author Report Share Posted July 17, 2015 It's only with orbx and it get's slightly sharper when i pause. I'll post a screenshot later Cheers Tom Link to post Share on other sites
donnybalonny 46 Posted July 17, 2015 Report Share Posted July 17, 2015 Does it also happen if you stay inside the VC. Or is it mostly when changing views. I have the same issues sometimes when changing views. (VC,outside, tower, aircraft) It happens mostly when going to Aircraft view. I have deleted the aircraft views on most of my planes and it has helped. I dont want them anyway. I prefer to just have the VC, outside and tower views. When I get the issue, I either look down on the seat and nothing else (something fixed and simple that doesnt move) for a couple of seconds and then it goes away. Or if I´m in a stress situeation, I pause as described. I have a feeling but I´m totally sure, that the more scenery I install, the more frequent and longer lasting the issue gets. I have a pretty clean install of some US regions on a fresh P3Dv2.5 install and the issues happens very seldom. Link to post Share on other sites
Thomas Farr 2 Posted July 17, 2015 Author Report Share Posted July 17, 2015 it's not that it is taxing my system by any means it happens in all views. It's good scenery but it is more a disappointment as it looks so good on the website and to then have blurry textures it is very annoying.# Link to post Share on other sites
donnybalonny 46 Posted July 17, 2015 Report Share Posted July 17, 2015 And what happens if you turn down the display sliders? Link to post Share on other sites
Captain Coffee 2,030 Posted July 17, 2015 Report Share Posted July 17, 2015 Have you checked in the fsx.cfg [Graphics] what your max texture load is? Ensure it is at least 2048. /2 cents. Link to post Share on other sites
Thomas Farr 2 Posted July 17, 2015 Author Report Share Posted July 17, 2015 it may be irrelevant but i am using steam edition of FSX??? it is still blurry when i turn the display sliders down! Link to post Share on other sites
wain 879 Posted July 18, 2015 Report Share Posted July 18, 2015 Using steam and orbx...dont get blurriness.. sometimes the trees are slow to be drawn but that is probably setting to high... Link to post Share on other sites
hlminx 301 Posted July 18, 2015 Report Share Posted July 18, 2015 ....I was just about to suggest looking at the Fiber frame time fraction setting to see if reducing it would help, but I have NO idea how things work in Steam. Have you tweaked your .cfg ? Just wondering what happens if you backup your current .cfg (just in case),and then let fsx se build a new one? Ive found in the past that most strange occurrences have often been down to me messing with settings so I've tried to leave tweaking to the absolute minimum as it invariably ends up causing me hours of confusion when I should be flying. Try a bog standard .cfg and if that improves things then you can gradually fine tune from there 1 Link to post Share on other sites
donnybalonny 46 Posted July 18, 2015 Report Share Posted July 18, 2015 IMO, FSX-SE shouldnt be tweaked and it has 4096 as max texture load by default. To be honest, I think you should ask at the ORBX forum. You´re not the only one with this problem and they should be able to help you better than here. After all, its their scenery. Link to post Share on other sites
Thomas Farr 2 Posted July 18, 2015 Author Report Share Posted July 18, 2015 cheers guys or the suggestions Link to post Share on other sites
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now