Jump to content

A2A Simulations announce AccuFeel V2 Air, Land & Sea


Recommended Posts

Just released is the next version of AccuFeel....

We are now live with the release of Accu:Feel Version 2.0 "Air, Land and Sea."

Although we knew Accu-Feel would be popular, we had no idea at just how popular it was to become (with many listing it on there must have addons for FSX). Once we realized just how much people where enjoying this "touch of Accu-Sim" for there entire hangar, we knew that the bigger dreams we had for the update had to become a reality. And so, with hard work and a "can do" attitude we set out to bring in some our ideas from the notepads we had whilst developing the original Accu-Feel. With some ups and downs and a couple of complete re-writes, the A2A testers did their magic and put the application through its paces (using there varied hangers of freeware, payware aircraft and weather engines). We are now happy to present the new Accu-Feel v2.0 "Air, Land and Sea."

Version 2 stays true to our commitment for the user to have ultimate control. You, the user, can tweak settings to your hearts content, allowing you to dial in realism/immersion the way you want it for your own flight adventures.

Heres the new feature list;

– Simple, safe non-destructive design leaves all of your aircraft directories untouched (aircraft.cfg, panel.cfg, etc. are not changed)

– Works with almost all FSX aircraft. Tested with both default and over forty 3rd party aircraft (helicopters not supported).

– Easy to use GUI (Graphical User Interface) allows for easy (and fun) customization of any aircraft

– Saves aircraft automatically

– Built using the Accu-Sim sound system, which is a proven powerful and safe on thousands of FSX installations

– Ground physics for both on and off pavement for both tricycle and tail dragger airframes bucks your airplane around, making just taxiing a

quality experience.

– Dynamic tire screeching and rub sounds tied into the physics of each tire, which makes every landing not just feel different, but sound different.

You have more feel for exactly how well you are controlling your aircraft, both big and small. New side forces add even more dynamics when

side-loading the landing gear.

– Water physics including dynamic wave size and speed, adds immersion for those who love to land on the water

– Turbulence modeling adds a feel based on our own experiences owning and operating aircraft

– Runway / pavement seams send dynamic jolts through your airframe that you can both feel and hear

– Cabin sounds from an old classic planes (bag of bolts) to the more modern, stronger pressurized tube liners, both on the ground and in the air

– Dynamic wind gives a strong sense of how your aircraft is flying, giving feel to everything from a glider to a commercial airliner

– Fuselage drag rumble is dynamically created, recreating the dropping of flaps, gear, or high pressures developed when approaching an

airframe's Vne (Never Exceed Speed). Both IAS and Mach limits are simulated

– Stall buffet and sounds creep in before the airplane stalls, giving you better feel and control of the aircraft while flying “on the edge”

– Brake squeals and vibration

– Open cockpit experience, which allows you to hear the suction of the wind, deep wind, propeller, or turbojet whine when opening a canopy or door

More here http://a2asimulations.com/forum/viewtopic.php?f=87&t=33303

Link to post
Share on other sites

One flight done. Settings still need some tweaking but I am fairly happy with landing sound and feel. Mind you it is still not in Accu Sim territory but better than default by far.

I will do some further experimentation and then post my settings for the DC-6 and may be a short fraps movie.

You can also take a look at the DC-6B at Calclassic. I like them a lot and they are free!

http://www.calclassic.com/dc6b.htm

Link to post
Share on other sites

Please sign in to comment

You will be able to leave a comment after signing in



Sign In Now
  • Recently Browsing   0 members

    No registered users viewing this page.

×
×
  • Create New...