gavoon1 19 Posted September 9, 2015 Report Share Posted September 9, 2015 Hello all, I have had problem for 3 weeks I would say. I purchased FSX steam edition about 1 month and half ago. I liked the sim and decided to purchase the airbus x addon for FSX and P3D... A couple of days after I got the airbus aircraft I started to experience a glitch where the speed brake wouldn't retract properly. It retract than go back to this default glitch position... I thought it was strange and I tried to redownload FSX and the airbus x addon thinking it was a aerosoft glitch... I talked to the guys at aerosoft on the support forum but they didnt really know what it was. It fixed itself for 3 flights but than it came back and ever since it comes back and wont go away. It really is a strange no one knows what it is, and no one else has reported having the same issue... I found out it effects the default FSX aircraft as well. So it can't be an aerosoft problem. So it must be an FSX glitch right? I dont want to spend more money if I dont have to.. But if I switch to P3D would that fix it? I need some advice cause I spent the the money and it is really annoying. FROOGLE SIM has sent me to this site. PLEASE ANYONE! give me some advice! Many thanks Gavin Link to post Share on other sites
Captain Coffee 2,030 Posted September 9, 2015 Report Share Posted September 9, 2015 Welcome to the forums, I regrettably have no Great guesses, especially as the problem appears intermittent at first, then "Stuck bugged". hrmmm.... This is completely out of left field, but is there any chance your "/" key is sticky? it is the default key command to deploy spoilers, and an intermittently buggy key might cause that kind of problem...like i said...completely left field guess. I'll wait to see what the Real Mutley gurus think about this weird one, but wanted to extend a welcome, as well as at least one SWAG (Scientific Wild A$$ Guess). Cheers. Link to post Share on other sites
gavoon1 19 Posted September 9, 2015 Author Report Share Posted September 9, 2015 Should I switch to p3d? Link to post Share on other sites
gavoon1 19 Posted September 9, 2015 Author Report Share Posted September 9, 2015 I have figured something out!!!! When my saitek x52 is diconnected it doesnt move!!! It stays the one problem is that I cant fly.. without the controller.. So any ideas is it the way the conmtroller is connected to the controls? Link to post Share on other sites
gavoon1 19 Posted September 9, 2015 Author Report Share Posted September 9, 2015 So it must have something to do with the programmed button to the controls. Link to post Share on other sites
stu7708 244 Posted September 9, 2015 Report Share Posted September 9, 2015 Could be that you have spoiler controls assigned to either a button or an axis on your controller that somehow overrides the keyboard control. Check the controller settings for spoilers in both the button and axis section of FSX and the Saitek profile software (if you use that), and make sure there are no duplicate assignments. If you want to just have the option of fully extending/retracting the spoilers I'd remove any assignment in the Axis tab, but if you want more precision control on how much you extend them instead remove any joystick button assigned to the spoilers. Also, double check in the controller settings in FSX if it sees your controller as one or two units by clicking the scroll list at the top of the settings window. If you see two Saitek-units in that list make sure that you only have Spoiler settings for one of them. Link to post Share on other sites
Bruce (a.k.a. brian747) 142 Posted September 9, 2015 Report Share Posted September 9, 2015 Hi Gavin, and welcome to Mutley's Hangar! Intermittent faults are always a pest, since you can never be entirely sure whether you've solved them. I wouldn't rush into P3D just yet (it's not so hugely different to FSX, in many respects), let's see whether we can sort out what's going on. You didn't actually say what you use to control the speed brake: is it the default slash key, or are you using something else that you've programmed yourself? My initial guess would be that you're right, it *is* something to do with the "programmed button to the controls" (what is that, incidentally?). It sounds very much as though you have something in your Saitek setup which is also mapped to the speed brake, and that is taking priority over the default key, if that's what you're using. (But more information, please, especially regarding what your "programmed button" is)! If you could tell us what controllers you are using, that would also help. You evidently have the X52 — are you using the Saitek software with that? Throttle quadrants? Other stuff? But as a starting point for you, I would recommend going carefully through *all* the key mappings that are set up in FSX, looking for anything to do with the speed brake; and then do the same with your Saitek software control mappings. I suspect you'll find that your speed brake is mapped to two different things at the same time, somewhere along the line. Best of luck — let us know how it goes! Cheers, bruce a.k.a. brian747 [Later edit: Sorry, Micke, we must have been typing at the same time. I'll stand back and let you run with this one, then, since you got there first]. B. Link to post Share on other sites
gavoon1 19 Posted September 12, 2015 Author Report Share Posted September 12, 2015 I have the throttle that comes with the x52.. And and I have tried deleting the assigned buttons for the retract and extend/ arm etc buttons. Is the someone that I can call? Or talk to on the phone Link to post Share on other sites
gavoon1 19 Posted September 12, 2015 Author Report Share Posted September 12, 2015 Thank You all it is fix the problem was under the spoiler axis! In the settings... So I will update if it comes back but I am confident it is fixed 1 Link to post Share on other sites
Captain Coffee 2,030 Posted September 12, 2015 Report Share Posted September 12, 2015 Glad you got it sorted...flying with speed brakes deployed does not sound fun. ... So I will update if it comes back but I am confident it is fixed No news is good Gurus. Link to post Share on other sites
Bruce (a.k.a. brian747) 142 Posted September 12, 2015 Report Share Posted September 12, 2015 Well done, Gavin! B. Link to post Share on other sites
brett 2,314 Posted September 12, 2015 Report Share Posted September 12, 2015 I edited your thread as resolved, glad you fixed the problem. Link to post Share on other sites
stu7708 244 Posted September 14, 2015 Report Share Posted September 14, 2015 Great news Gavin.. Now enjoy your time with FSX, and don't hesitate to ask again if you run into more issues! Link to post Share on other sites
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now