mutley 4,498 Posted January 17, 2012 Report Share Posted January 17, 2012 Please add to this list if you find things dont work. ENB series HD mod. When enabled the menu pictures like the aircraft preview do not work Also when closing down P3D a Windows "Stopped responding" message is shown. Link to post Share on other sites
mutley 4,498 Posted January 17, 2012 Author Report Share Posted January 17, 2012 FSUIPC, this has not been enabled in P3D yet, should have full compatibility in V1.3 Edit: Working OK, ensure latest version 4.758 is used, marked P3D compatible on the download page Simconnect should be OK Link to post Share on other sites
mutley 4,498 Posted January 17, 2012 Author Report Share Posted January 17, 2012 Carenado 337 Skymaster. Will only install into default FSX location, you have to port the files over manually. EDIT: This can be installed by using the TweakFS registry fixer to point the installer to your Prepar3D folder. I created a dummy fsx.exe and placed it there too. However, I find that the sim will crash when clicking on the GNS530 and a lot of the VC click-spots to not appear to work. I Have found the same issue with the P-46-T Link to post Share on other sites
mutley 4,498 Posted January 17, 2012 Author Report Share Posted January 17, 2012 Thanks Mike that is great news and just the feedback we need! I am sure it didn't like it when I started the sim. I will investigate more and report back. Cheers, Joe Link to post Share on other sites
mutley 4,498 Posted January 17, 2012 Author Report Share Posted January 17, 2012 Thanks Mike I must have had the wrong version it works fine now! I will edit the above and add to the other topic. Cheers, Joe Link to post Share on other sites
Tim_A 997 Posted January 20, 2012 Report Share Posted January 20, 2012 Not really 'programs' as such, but if you have two identical USB throttle quadrants (as I do, for twin engine ops), only one of them can be configured through the UI. The other can only be set up by directly editing the controls.ini They say this is a known issue that will be fixed in 1.3. Link to post Share on other sites
mutley 4,498 Posted February 7, 2012 Author Report Share Posted February 7, 2012 Yes I saw that too, I do wonder how the likes of Aerosoft are getting aoround this as their products are obviously retail. Link to post Share on other sites
Tim_A 997 Posted February 7, 2012 Report Share Posted February 7, 2012 There should be a law against lawyers. Link to post Share on other sites
mutley 4,498 Posted February 7, 2012 Author Report Share Posted February 7, 2012 Lawyers must be the only "people" who take life seriously. Link to post Share on other sites
britfrog 180 Posted March 24, 2012 Report Share Posted March 24, 2012 it takes a certain type of sick person who profits from the misery of another Link to post Share on other sites
allardjd 1,853 Posted March 24, 2012 Report Share Posted March 24, 2012 99% of lawyers make the rest look bad... John Link to post Share on other sites
FOXYWALES 0 Posted April 26, 2012 Report Share Posted April 26, 2012 Hi, I have changed the registry to look at P3D instead of FSX, on installing VOXATC V6, they recommended the registry change, entries show in P3D menus but the VOXATC window does not appear when checked. Strangely the recent VOXATC window appears when clicked on but is blank as there are no recent messages yet. Has anyone else had this problem or has solved it please. Update: Found that two gauges required for VOXATC hadn't copied into the main gauge folder of P3D, once done all working very well. Link to post Share on other sites
LuxRalf 0 Posted October 8, 2012 Report Share Posted October 8, 2012 Hi, the Flight1 Cessna 162 Skycatcher has a problem with the gauges. All OK, but the Garmin G300 shows only the text: License problems (I think with the license typ of P3D) Link to post Share on other sites
mutley 4,498 Posted October 8, 2012 Author Report Share Posted October 8, 2012 Thanks Ralf and welcome to the forums. I have this aircraft but not tried it yet in P3D, was there a P3D installer or did you port it manually? Cheers, joe Link to post Share on other sites
LuxRalf 0 Posted October 9, 2012 Report Share Posted October 9, 2012 There is no P3D installer. Flight1 said to me that this is a license problem (entertainment license!?) I have done the tweaks for P3D like "TweakFS registry fixer" but I have done this by hand. The "TweakFS registry fixer" was not available at the time when I did it. The tweak is working fine at other sceneries and airplanes (also PDMG etc). Link to post Share on other sites
mutley 4,498 Posted October 9, 2012 Author Report Share Posted October 9, 2012 Have you got the c162fsx.lic file in your C:\Flight One Software folder, or it maybe elsewhere on your PC? I guess the thing to do is manually remove it from P3D and re-install using the registry fix tool. Link to post Share on other sites
Jess-b 420 Posted October 9, 2012 Report Share Posted October 9, 2012 Here's one to add. Aerosoft's excellent Da-20 katana. It can be installed and if you leave it in simple flight mode, it flies well. However in realistic mode you'll be probe to random failures. I've had engines fail if I change the time and date, batteries fail in flight and so on. It's most likely a sim connect issue as p3d has slightly different protocols to the older FSX version. Jess B Link to post Share on other sites
Bruce (a.k.a. brian747) 142 Posted November 14, 2013 Report Share Posted November 14, 2013 The PMDG 777 will not work in P3D (by design — it exits after giving a polite message that it isn't supported on that platform). Also, Aivlasoft EFB v1.x is not supported in P3D. (Whilst I have seen occasional reports that some people have got v1.4 to work, others have had problems). Version 2 (currently being written, and hopefully to be released in 2014) will fully support P3D; and its interface to the sim will be via FSUIPC rather than SimConnect. Cheers, Bruce Link to post Share on other sites
Christopher Low 63 Posted November 18, 2013 Report Share Posted November 18, 2013 Has anyone actually tried installing the Flight1 Cessna Citation Mustang in P3D? I am under the impression that it will not work, but sometimes this actually means "we will add you to our naughty boy book if you try". Link to post Share on other sites
phil white 274 Posted December 27, 2013 Report Share Posted December 27, 2013 The Carenado Cessna 182T HD does not work, incomplete cockpit and several other things too. Link to post Share on other sites
Molew 0 Posted March 31, 2014 Report Share Posted March 31, 2014 I wonder if the folks reporting non-operational add-ons have tried again since the .dll update posted shortly after version 2.1 was released? I know some items (PMDG) simply will not work, on purpose, but many of the others will work with the updated .dll's. If you haven't got the updated .dll's after having upgraded to version 2.1, visit here: http://www.prepar3d.com/forum-5/?mingleforumaction=viewtopic&t=5696 Link to post Share on other sites
brett 2,316 Posted April 2, 2014 Report Share Posted April 2, 2014 Thanks for the heads up Sandy and welcome to Mutley's Hangar. Link to post Share on other sites
JohnY 1 Posted April 3, 2015 Report Share Posted April 3, 2015 Dave Porter's Power Projects 4.2 works fine except the wind turbines don't display and neither do the steam/smoke effects. The pylons (millions of 'em) and chimneys are all there though. John Link to post Share on other sites
flybytes 34 Posted April 3, 2015 Report Share Posted April 3, 2015 JohnY Assuming your post is about FSX Power Project v4.2. The electricity pylons are default FSX models, and, not quite millions of them, v4.2 has about 36,000 (v4.3 when released will have about 46,000 - the extra pylons are mostly in Scotland). I don't have Prepar3D (who on Earth came up with that name?) so welcome the feedback. The smoke/steam special effects were created using the official FSX guidelines, but the wind turbine models were modified in v4.2 to 'true FSX models' from the fs2004 models of earlier versions using the brilliant, but quirky Arno Gerretsen's ModelConverterX to improve frame-rates & provide smoother animations. By the way, I've been called many names over the years, but never Dave - reminiscent of Rodney in Fools & Horses. Cheers, Ray Porter. Link to post Share on other sites
Kevin Firth 114 Posted April 3, 2015 Report Share Posted April 3, 2015 Hi Ray, I exclusively run P3D, if you'd like me to test or feedback before v4.3 just shout. K Perhaps a P3D specific version of the turbines via MCX is all thats called for? Link to post Share on other sites
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now