mike H 456 Posted August 6, 2010 Report Share Posted August 6, 2010 She is looking just great Jack. Well Done Matey Will not be long now before you can take to the skys. Link to post Share on other sites
Aircraft Aviation 2 Posted August 8, 2010 Author Report Share Posted August 8, 2010 Thanks very much Mike! :smile: Link to post Share on other sites
Aircraft Aviation 2 Posted August 8, 2010 Author Report Share Posted August 8, 2010 8th August 2010 The DECCA (Weather Radar) Panel has been installed. Also, very much like the Audio Panel, the switches have been made ready for connection to the Master Card (which has now been ordered!), and a power cable has been attatched to the backlighting facility. This means that the backlighting on the Weather Radar Panel works properly. However, unlike the Audio Panel, it does not come on straight away. The adequately named LI (Lights) Switch is being used as a circuit controller. If the power is ON, the one flick of the LI switch brings the beautiful red backlgihting to life! So yes, the Audio Panel and Weather Radar Panel are two wonderful looking Units, especially in the dark! They will be interfaced to the LDS767 using SIOC and Nico Kaan's Lekseecon program, all done of course when the Master Card arrives. Photos: Now, whilst it is obvious that the Audio Panel will be interfaced to the LDS767 Audio Panel, the weather Radar is a different matter. Why? Because the LDS767 doesn't have a Weather Radar. So, I've decided to develop my own weather Radar system. The weather radar system logic is based upon LEDs illuminating under certain conditions. Namely, the LEDs for the "OP" and "REF" Lights. It works like this: - If the Mode Knob is turned to "REF", then the Panel gives out precipitation reports. If the precipitation, weather it be rain or snow, is heavy, then the "REF" LED illuminates. - If the Mode Select Knob is turned to "OP", then the panel still gives out precipitation reports, but it ALSO gives out turbulence reports. If the Cloud turbulence is above a certain level, the "OP" LED will also illuminate. - the "Chain" Knob selects the cloud LEVEL. For example, if it is turned to Chain 1, Precipitation Reports and turbulence reports will only be received for Cloud LAYER 1. If you are wondering where all these Knobs/Switches?LEDs are, take a look at the DECCA/Weather Radar Panel closeup below: It has taken me a very long time to come up with my own Radar System, and it takes even longer for me to do the extremely complex SIOC Scripting involved. Please give me yur honest feedback on the Radar system, I would like to know what you think. thanks for reading everyone! Jack :smile: Link to post Share on other sites
Aircraft Aviation 2 Posted August 31, 2010 Author Report Share Posted August 31, 2010 31st August 2010 I have re-updated the first post to accurately reflect the Pedestal's status. As you can see, there is hardly anything left to go. The throttle unit and rudder/aileron trim units are all that remain. For the throttle, I'm *considering* modifying two Saitek ProFlight Quadrants, much like Drewsta of the MyCockpit Forums did... http://www.mycockpit.org/forums/showthr ... #post88758 The Trim Units will probably come from Opencockpits. Please note, the throttle and trim Units will not be in place for awhile, due to workload & overhead panel workings. IN OTHER NEWS..... The DECCA Panel is almost complete. I have quiet a few surprises arriving wih this baby... And they just might benefit you! Stay tuned :dance: . Link to post Share on other sites
Aircraft Aviation 2 Posted September 9, 2010 Author Report Share Posted September 9, 2010 Thursday 9th September NEW FEATURES: - The DECCA (Weather Radar Panel) has been FULLY wired up and installed. I am performing some final few coding, quality and usability checks before the weater radar is in full swing! :biggrin: Wiring: Another picture of the panel, taking with nothing turned on and all switches off (when in operation, everything is functionable): Jack :???: Link to post Share on other sites
mutley 4,498 Posted September 9, 2010 Report Share Posted September 9, 2010 The RWP is a great addition Jack and well done for getting it working, I enjoyed the explanation as to its use. :biggrin: It looks well used but that's what you expect with a 100% authentic product. Cheers Joe Link to post Share on other sites
mike H 456 Posted September 10, 2010 Report Share Posted September 10, 2010 Looking FAB. Jack. :biggrin: Will you be holding cockpit lessons for us mortals when it's up and running. :???: Link to post Share on other sites
Aircraft Aviation 2 Posted September 10, 2010 Author Report Share Posted September 10, 2010 Looking FAB. Jack. :biggrin: Will you be holding cockpit lessons for us mortals when it's up and running. :???: Interesting that you ask that Mike... I have been discussing with Joe a *potential* Stand Display at next year's Duxford/JustFlight FS2011. I will try & bring the Pedestal + Overhead along if possible. :smile: Link to post Share on other sites
mike H 456 Posted September 11, 2010 Report Share Posted September 11, 2010 Hi Jack, Great News i will make a note in my diary then. PS Just remembered i do not have a diary for 2011 yet. Link to post Share on other sites
Aircraft Aviation 2 Posted September 18, 2010 Author Report Share Posted September 18, 2010 PLEASE ADD ME AS A FRIEND ON YOUTUBE!!! Hi everyone, As per the red title above, I am requesting (if you wish, of course) that you add me as a friend on YouTube. Why? Within the next month or so, I am considering doing a few Video Update Blogs, instead of the usual text format. However, I do not want anybody willy-nilly viewing these videos (sorry, to many spammers & idiots on YouTube). So, if you wish to view these videos, please add me as a friend on YouTube. My Youtube account name is "Homerard", link here: http://www.youtube.com/user/Homerard?feature=mhum Please note, even if you do send me a friend request, it will have to be accepted by me first, so don't worry if you don't get "befriended" straight away. for those of you who do not have a YouTube account, please do not worry, as I will still post my update blogs in text formatting alongside the videos. I do, however, reccommend getting an account . thanks alot, Jack PS: Message also posted in 767 Overhead Project (IDENTICAL MESSAGES) Link to post Share on other sites
mutley 4,498 Posted September 18, 2010 Report Share Posted September 18, 2010 Done! Link to post Share on other sites
Aircraft Aviation 2 Posted September 18, 2010 Author Report Share Posted September 18, 2010 Done! Hi Joe, Many thanks for subscribing! BTW: Are you sure you clicked "add as friend"? Just subscribing alone I think does not enlist as a friend, I may be wrong. I have sent you an invitation anyway. :smile: Link to post Share on other sites
Aircraft Aviation 2 Posted October 10, 2010 Author Report Share Posted October 10, 2010 Sunday 10th October 2010 NEW FEATURES: - FMC/CDU "EXEC" White LED Light NOW FULLY Functional This light illuminates whenever information needs to be "confirmed" (executed) into the CDU. For example, when route information is activated: And after the information has been confirmed (executed), pressing of the EXEC button: Furthermore, please add me as a Friend on YouTube so you can see my upcoming vieo-style blogs; won't be too long now. Jack :001_th_smiles89: Link to post Share on other sites
rob16584 42 Posted October 10, 2010 Report Share Posted October 10, 2010 Looking good Jack :001_th_smiles89: Link to post Share on other sites
needles 1,013 Posted October 10, 2010 Report Share Posted October 10, 2010 Hey Jack, Lovely work mate. What's next on the agenda? regards Brian PS. I'm now following you on YT Link to post Share on other sites
Aircraft Aviation 2 Posted October 10, 2010 Author Report Share Posted October 10, 2010 Hey Jack, Lovely work mate. What's next on the agenda? regards Brian PS. I'm now following you on YT Hi Brian, Thanks very much, I've approved your request so you'll be able to watch the blogs :biggrin: . Link to post Share on other sites
Aircraft Aviation 2 Posted October 17, 2010 Author Report Share Posted October 17, 2010 First Video Blog Released!!! this blog covers the basics of my cockpit. Size, sections and so forth. Those of you who became my friend on YT will be able to watch this video. You've either been sent a PM or email allowing you to wathc the video (sorry, thoghut it would be simpler. Idiots over at YT have re-shuffled the friend system again). Please tell me if you're having problems. Having problems? Take a look how Brian (Needles) viewed the Blog: FIRST ENSURE YOU'VE SENT ME A FRIEND APPLICATION TO MY YOUTUBE ACCOUNT, "HOMERARD". "I recieved an email saying you had posted a blog. I just logged on and went to your blog site and viewed. All pretty straight forward for me" Link to post Share on other sites
Aircraft Aviation 2 Posted November 20, 2010 Author Report Share Posted November 20, 2010 Saturday 20th November Happy birthday Pedestal Project! :bday: Yes, it has been exactly a year since I first opened this thread to the community here... And what can I say. It has grown. I predicted I'd be completely finished around now, and, whilst that is mainly true, there are still a few things left. Thank you everybody for your support! Looking forward to another year of hardware goodness!!! :001_th_smiles89: Jack Link to post Share on other sites
needles 1,013 Posted November 20, 2010 Report Share Posted November 20, 2010 :bday: Pedestal Project!! Looking forward to all your new additions before your next birthday! Well Done to Jack and Jacks Dad. Needles Link to post Share on other sites
mutley 4,498 Posted November 21, 2010 Report Share Posted November 21, 2010 Well done for sticking with it Jack and producing great reviews too. Cheers, Joe Link to post Share on other sites
Aircraft Aviation 2 Posted November 21, 2010 Author Report Share Posted November 21, 2010 Thanks very much Brian & Joe! Anybody fancy baking a cake? Link to post Share on other sites
mike H 456 Posted November 21, 2010 Report Share Posted November 21, 2010 Well Done to you both for a great project and keeping us all upto date with whats been going on. A Big Thank You guys. :bday: Has it been a year :th_smiles73: well I would not have guessed that. Looking forward to what you have instore for us next year. Link to post Share on other sites
TomA320 0 Posted December 4, 2010 Report Share Posted December 4, 2010 Not checked this topic in a while, but it's really taking shape. Nice wrok Jack! Link to post Share on other sites
Aircraft Aviation 2 Posted December 11, 2010 Author Report Share Posted December 11, 2010 Thank you very much Tom! And Mike, thanks too. Belive me, you're not the only one who can't believe it has been a year :biggrin: . Link to post Share on other sites
Aircraft Aviation 2 Posted December 22, 2010 Author Report Share Posted December 22, 2010 Wednesday 22nd December 2010 For those of you who have missed the regular updates on the Pedestal... Fear not. I am happy to announce that at New Year I will be purchasing, along with some other hardware items, the Opencockpits Rudder and Aileron Trim Panel. http://www.opencockpits.com/catalog/rudder-trim-indicator-with-panel-p-277.html?cPath=48 This is a fully working and fully functional Rudder and Aileron Trim Panel. as you can see from the picture above, it includes the Beoing Trademark "Big Fat" Rudder Knob, and two fully-operation spring-release aileron switches. The "Creme de la Creme" of the Unit would have to be the Trim Scale. This Servo-Driven scale is fully-synced with flight simulator and will give the exact trim reference of the rudder position. I hope to install it soon after I receive the item at New Year. Any questions? Please ask. Regards, Jack Link to post Share on other sites
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now